14 CFR § 125.297 - Approval of flight simulators and flight training devices.
---
identifier: "/us/cfr/t14/s125.297"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "14 CFR § 125.297 - Approval of flight simulators and flight training devices."
title_number: 14
title_name: "Aeronautics and Space"
section_number: "125.297"
section_name: "Approval of flight simulators and flight training devices."
chapter_name: "FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION"
subchapter_number: "G"
subchapter_name: "AIR CARRIERS AND OPERATORS FOR COMPENSATION OR HIRE: CERTIFICATION AND OPERATIONS"
part_number: "125"
part_name: "CERTIFICATION AND OPERATIONS: AIRCRAFT HAVING A SEATING CAPACITY OF 20 OR MORE PASSENGERS OR A MAXIMUM PAYLOAD CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "49 U.S.C. 106(f), 106(g), 40113, 44701-44702, 44705, 44710-44711, 44713, 44716-44717, 44722."
regulatory_source: "Docket 19779, 45 FR 67235, Oct. 9, 1980, unless otherwise noted."
cfr_part: "125"
---
# 125.297 Approval of flight simulators and flight training devices.
(a) Flight simulators and flight training devices approved by the Administrator may be used in training, testing, and checking required by this subpart.
(b) Each flight simulator and flight training device that is used in training, testing, and checking required under this subpart must be used in accordance with an approved training course conducted by a training center certificated under part 142 of this chapter, or meet the following requirements:
(1) It must be specifically approved for—
(i) The certificate holder;
(ii) The type airplane and, if applicable, the particular variation within type for which the check is being conducted; and
(iii) The particular maneuver, procedure, or crewmember function involved.
(2) It must maintain the performance, functional, and other characteristics that are required for approval.
(3) It must be modified to conform with any modification to the airplane being simulated that changes the performance, functional, or other characteristics required for approval.
[Docket 19779, 45 FR 67235, Oct. 9, 1980, as amended by Amdt. 125-27, 61 FR 34561, July 2, 1996]