14 CFR § 25.605 - Fabrication methods.

---
identifier: "/us/cfr/t14/s25.605"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "14 CFR § 25.605 - Fabrication methods."
title_number: 14
title_name: "Aeronautics and Space"
section_number: "25.605"
section_name: "Fabrication methods."
chapter_name: "FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION"
subchapter_number: "C"
subchapter_name: "AIRCRAFT"
part_number: "25"
part_name: "AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "49 U.S.C. 106(f), 106(g), 40113, 44701, 44702 and 44704; Pub. L. 115-254, 132 Stat 3281 (49 U.S.C. 44903 note)."
regulatory_source: "Docket No. 5066, 29 FR 18291, Dec. 24, 1964, unless otherwise noted."
cfr_part: "25"
---


# 25.605 Fabrication methods.

(a) The methods of fabrication used must produce a consistently sound structure. If a fabrication process (such as gluing, spot welding, or heat treating) requires close control to reach this objective, the process must be performed under an approved process specification.

(b) Each new aircraft fabrication method must be substantiated by a test program.

[Doc. No. 5066, 29 FR 18291, Dec. 24, 1964, as amended by Amdt. 25-46, 43 FR 50595, Oct. 30, 1978]