14 CFR § 25.693 - Joints.

---
identifier: "/us/cfr/t14/s25.693"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "14 CFR § 25.693 - Joints."
title_number: 14
title_name: "Aeronautics and Space"
section_number: "25.693"
section_name: "Joints."
chapter_name: "FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION"
subchapter_number: "C"
subchapter_name: "AIRCRAFT"
part_number: "25"
part_name: "AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "49 U.S.C. 106(f), 106(g), 40113, 44701, 44702 and 44704; Pub. L. 115-254, 132 Stat 3281 (49 U.S.C. 44903 note)."
regulatory_source: "Docket No. 5066, 29 FR 18291, Dec. 24, 1964, unless otherwise noted."
cfr_part: "25"
---


# 25.693 Joints.

Control system joints (in push-pull systems) that are subject to angular motion, except those in ball and roller bearing systems, must have a special factor of safety of not less than 3.33 with respect to the ultimate bearing strength of the softest material used as a bearing. This factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings, the approved ratings may not be exceeded.

[Amdt. 25-72, 55 FR 29777, July 20, 1990]