14 CFR § 43.2 - Records of overhaul and rebuilding.

---
identifier: "/us/cfr/t14/s43.2"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "14 CFR § 43.2 - Records of overhaul and rebuilding."
title_number: 14
title_name: "Aeronautics and Space"
section_number: "43.2"
section_name: "Records of overhaul and rebuilding."
chapter_name: "FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION"
subchapter_number: "C"
subchapter_name: "AIRCRAFT"
part_number: "43"
part_name: "MAINTENANCE, PREVENTIVE MAINTENANCE, REBUILDING, AND ALTERATION"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 7572; 49 U.S.C. 106(f), 40105, 40113, 44701-44702, 44704, 44707, 44709, 44711, 44713, 44715, 45303."
regulatory_source: "Docket No. 1993, 29 FR 5451, Apr. 23, 1964, unless otherwise noted."
cfr_part: "43"
---


# 43.2 Records of overhaul and rebuilding.

(a) No person may describe in any required maintenance entry or form an aircraft, airframe, aircraft engine, propeller, appliance, or component part as being overhauled unless—

(1) Using methods, techniques, and practices acceptable to the Administrator, it has been disassembled, cleaned, inspected, repaired as necessary, and reassembled; and

(2) It has been tested in accordance with approved standards and technical data, or in accordance with current standards and technical data acceptable to the Administrator, which have been developed and documented by the holder of the type certificate, supplemental type certificate, or a material, part, process, or appliance approval under part 21 of this chapter.

(b) No person may describe in any required maintenance entry or form an aircraft, airframe, aircraft engine, propeller, appliance, or component part as being rebuilt unless it has been disassembled, cleaned, inspected, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item, using either new parts or used parts that either conform to new part tolerances and limits or to approved oversized or undersized dimensions.

[Amdt. 43-23, 47 FR 41084, Sept. 16, 1982, as amended by Amdt. 43-43, 74 FR 53394, Oct. 16, 2009]