16 CFR § 1512.14 - Requirements for fork and frame assembly.

---
identifier: "/us/cfr/t16/s1512.14"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "16 CFR § 1512.14 - Requirements for fork and frame assembly."
title_number: 16
title_name: "Commercial Practices"
section_number: "1512.14"
section_name: "Requirements for fork and frame assembly."
chapter_name: "CONSUMER PRODUCT SAFETY COMMISSION"
subchapter_number: "C"
subchapter_name: "FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS"
part_number: "1512"
part_name: "REQUIREMENTS FOR BICYCLES"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "Secs. 2(f)(1)(D), (q)(1)(A), (s), 3(e)(1), 74 Stat. 372, 374, 375, as amended, 80 Stat. 1304-05, 83 Stat. 187-89 (15 U.S.C. 1261, 1262); Pub. L. 107-319, 116 Stat. 2776."
regulatory_source: "43 FR 60034, Dec. 22, 1978, unless otherwise noted."
cfr_part: "1512"
---


# 1512.14 Requirements for fork and frame assembly.

The fork and frame assembly shall be tested for strength by application of a load of 890 N (200 lbf) or at least 39.5 J (350 in-lb) of energy, whichever results in the greater force, in accordance with the frame test, § 1512.18(k)(2), without visible evidence of fracture or frame deformation that significantly limits the steering angle over which the wheel can be turned. Sidewalk bicycles are exempt from this section.