24 CFR § 3286.509 - Reinspection upon failure to pass.

---
identifier: "/us/cfr/t24/s3286.509"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "24 CFR § 3286.509 - Reinspection upon failure to pass."
title_number: 24
title_name: "Housing and Urban Development"
section_number: "3286.509"
section_name: "Reinspection upon failure to pass."
chapter_name: "OFFICE OF ASSISTANT SECRETARY FOR HOUSING—FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT"
part_number: "3286"
part_name: "MANUFACTURED HOME INSTALLATION PROGRAM"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 3535(d), 5404, and 5424."
regulatory_source: "73 FR 35292, June 20, 2008, unless otherwise noted."
cfr_part: "3286"
---


# 3286.509 Reinspection upon failure to pass.

(a) *Procedures for failed inspection.* If the inspector cannot verify the installation of the manufactured home, the inspector must immediately notify the installer of any failures to comply with the installation standards and explain the reasons why the inspector cannot issue verification that the installation complies with the requirements of this part. After the installation is corrected, it must be reinspected before verification can be issued.

(b) *Cost of reinspection.* If there is any cost for the reinspection of an installation that an inspector has refused to verify, that cost must be paid by the installer or the retailer and, absent a written agreement with the purchaser that specifically states otherwise, that cost cannot be charged to the purchaser of the manufactured home.