Skip to content
LexBuild

27 CFR § 9.141 - Escondido Valley.

---
identifier: "/us/cfr/t27/s9.141"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "27 CFR § 9.141 - Escondido Valley."
title_number: 27
title_name: "Alcohol, Tobacco Products and Firearms"
section_number: "9.141"
section_name: "Escondido Valley."
chapter_name: "ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY"
subchapter_number: "A"
subchapter_name: "ALCOHOL"
part_number: "9"
part_name: "AMERICAN VITICULTURAL AREAS"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "27 U.S.C. 205."
regulatory_source: "T.D. ATF-60, 44 FR 56692, Oct. 2, 1979, unless otherwise noted."
cfr_part: "9"
---

# 9.141 Escondido Valley.

(a) *Name.* The name of the viticultural area described in this section is “Escondido Valley.”

(b) *Approved map.* The appropriate map for determining the boundaries of the “Escondido Valley” viticultural area is 1 U.S.G.S. (scale 1:250,000) map. It is titled Fort Stockton, Texas, 1954 (revised 1973).

(c) *Boundary.* The Escondido Valley viticultural area is located in Pecos County, Texas. The boundary is as follows:

(1) The beginning point is the intersection of Interstate Route 10 (I-10) and an intermittent stream approximately 18 miles east of the city of Fort Stockton (standard reference GE3317 on the Fort Stockton, Texas, U.S.G.S. map);

(2) From the beginning point, the boundary follows I-10 in an easterly direction approximately 9 miles until a southbound trail diverges from I-10 just past the point where it intersects horizontal grid line 2 of square GE on the Fort Stockton, Texas, U.S.G.S. map;

(3) The boundary then follows the trail in a generally southeasterly direction about 5 miles until it intersects the 3000 foot contour line;

(4) The boundary follows the 3000 foot contour line in a generally westerly direction approximately 17 miles;

(5) The boundary continues to follow the 3000 foot contour line as it turns sharply northwest, but diverges from the contour line when the contour line turns south again;

(6) From the point where it diverges from the contour line, the boundary follows a straight north-northwesterly line as it returns to the beginning point at I-10.

[ATF-322, 57 FR 20761, May 15, 1992]