30 CFR § 550.1167 - What information must I submit with forms and for approvals?

---
identifier: "/us/cfr/t30/s550.1167"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "30 CFR § 550.1167 - What information must I submit with forms and for approvals?"
title_number: 30
title_name: "Mineral Resources"
section_number: "550.1167"
section_name: "What information must I submit with forms and for approvals?"
chapter_name: "BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR"
subchapter_number: "B"
subchapter_name: "OFFSHORE"
part_number: "550"
part_name: "OIL AND GAS AND SULFUR OPERATIONS IN THE OUTER CONTINENTAL SHELF"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "30 U.S.C. 1751; 31 U.S.C. 9701; 43 U.S.C. 1334."
regulatory_source: "76 FR 64623, Oct. 18, 2011, unless otherwise noted."
cfr_part: "550"
---


# 550.1167 What information must I submit with forms and for approvals?

You must submit the supporting information listed in the following table with the form identified in column 1 and for the approval required under this subpart identified in column 2:

|  | SRI BOEM-0127(2 copies) | Reservoir reclassification |
| --- | --- | --- |
| (a) Maps: |  |  |
| (1) Base map with surface, bottomhole, and completion locations with respect to the unit or lease line and the orientation of representative seismic lines or cross-sections |  |  |
| (2) Structure maps with penetration point and subsea depth for each well penetrating the reservoirs, highlighting subject wells; reservoir boundaries; and original and current fluid levels | √ | √ |
| (3) Net sand isopach with total net sand penetrated for each well, identified at the penetration point | * |  |
| (4) Net hydrocarbon isopach with net feet of pay for each well, identified at the penetration point | * |  |
| (b) Seismic data: |  |  |
| (1) Representative seismic lines, including strike and dip lines that confirm the structure; indicate polarity |  |  |
| (2) Amplitude extraction of seismic horizon, if applicable |  | √ |
| (c) Logs: |  |  |
| (1) Well log sections with tops and bottoms of the reservoir(s) and proposed or existing perforations | √ | √ |
| (2) Structural cross-sections showing the subject well and nearby wells |  | √ |
| (d) Engineering data: |  |  |
| (1) Estimated recoverable reserves for each well completion in the reservoir; total recoverable reserves for each reservoir; method of calculation; reservoir parameters used in volumetric and decline curve analysis | √ |  |
| (2) Well schematics showing current and proposed conditions |  |  |
| (3) The drive mechanism of each reservoir | √ | √ |
| (4) Pressure data, by date, and whether they are estimated or measured |  | √ |
| (5) Production data and decline curve analysis indicative of the reservoir performance |  | √ |
| (6) Reservoir simulation with the reservoir parameters used, history matches, and prediction runs (include proposed development scenario) |  | * |
| (e) General information: |  |  |
| (1) Detailed economic analysis |  |  |
| (2) Reservoir name and whether or not it is competitive as defined under § 250.105 | √ | √ |
| (3) Operator name, lessee name(s), block, lease number, royalty rate, and unit number (if applicable) of all relevant leases |  |  |
| (4) Geologic overview of project |  | √ |
| (5) Explanation of why the proposed completion scenario will maximize ultimate recovery |  |  |
| (6) List of all wells in subject reservoirs that have ever produced or been used for injection |  | √ |
| √ Required. |  |  |
| * Additional items the Regional Supervisor may request. |  |  |
| Note: All maps must be at a standard scale and show lease and unit lines. The Regional Supervisor may waive submittal of some of the required data on a case-by-case basis. |  |  |

(f) Depending on the type of approval requested, you must submit the appropriate payment of the service fee(s) listed in § 550.125, according to the instructions in § 550.126.