Title 40, Part 1036 — Control of Emissions From New and In-use Heavy-duty Highway Engines

Applicability.

Compliance responsibility.

Excluded engines.

Organization of this part.

Other applicable regulations.

Submission of information.

Overview of exhaust emission standards.

Criteria pollutant emission standards—NO, HC, PM, and CO.

Greenhouse gas emission standards—CO, CH, and NO.

Diagnostic controls.

Inducements related to SCR.

Other requirements.

Emission-related warranty requirements.

Maintenance instructions and allowable maintenance.

Installation instructions for vehicle manufacturers.

Labeling.

Clean Idle sticker.

Primary intended service class and engine cycle.

Interim provisions.

General requirements for obtaining a certificate of conformity.

Requirements for an application for certification.

Preliminary approval before certification.

Amending applications for certification.

Selecting engine families.

xxx

Testing requirements for certification.

Demonstrating compliance with criteria pollutant emission standards.

Demonstrating compliance with greenhouse gas emission standards.

Deterioration factors for exhaust emission standards.

Verifying deterioration factors.

Reporting and recordkeeping for certification.

EPA oversight on certificates of conformity.

Measurements related to GEM inputs in a selective enforcement audit.

Testing requirements for in-use engines.

Overview of the manufacturer-run field-testing program.

Selecting and screening vehicles and engines for testing.

Preparing and testing engines.

Pass criteria for individual engines.

Pass criteria for engine families.

Reporting requirements.

Recordkeeping requirements.

Warranty obligations related to in-use testing.

General testing provisions.

xxx

Engine data and information to support vehicle certification.

Supplemental Emission Test.

Federal Test Procedure.

Low Load Cycle.

Determining power and vehicle speed values for powertrain testing.

Clean Idle test.

Test procedures for off-cycle testing.

Determining steady-state engine fuel maps and fuel consumption at idle.

Determining cycle-average engine fuel maps.

Carbon balance error verification.

Powertrain testing.

Calculating greenhouse gas emission rates.

Test procedures to verify deterioration factors.

Infrequently regenerating aftertreatment devices.

Overview of compliance provisions.

Alternate emission standards for engines used in specialty vehicles.

Off-cycle technology credits and adjustments for reducing greenhouse gas emissions.

Engines with Rankine cycle waste heat recovery and hybrid powertrains.

Alternate CO standards based on model year 2011 compression-ignition engines.

In-use compliance with CO family emission limits (FELs).

Certification of engine greenhouse gas emissions for powertrain testing.

Certification requirements for high-GCWR medium-duty vehicles.

Special provisions for diesel-fueled engines sold in American Samoa or the Commonwealth of the Northern Mariana Islands.

General provisions.

Generating and calculating emission credits.

Averaging.

Banking.

Trading.

Required information for certification.

ABT reports.

Recordkeeping.

Restrictions for using emission credits.

End-of-year CO credit deficits.

Consequences for noncompliance.

Information provided to the Department of Transportation.

Definitions.

Symbols, abbreviations, and acronyms.

Incorporation by reference.

Confidential information.

Requesting a hearing.

Reporting and recordkeeping requirements.