40 CFR § 465.13 - New source performance standards.
---identifier: "/us/cfr/t40/s465.13"source: "ecfr"legal_status: "authoritative_unofficial"title: "40 CFR § 465.13 - New source performance standards."title_number: 40title_name: "Protection of Environment"section_number: "465.13"section_name: "New source performance standards."chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"subchapter_number: "N"subchapter_name: "EFFLUENT GUIDELINES AND STANDARDS"part_number: "465"part_name: "COIL COATING POINT SOURCE CATEGORY"positive_law: falsecurrency: "2026-04-05"last_updated: "2026-04-05"format_version: "1.1.0"generator: "[email protected]"authority: "Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217."regulatory_source: "47 FR 54244, Dec. 1, 1982, unless otherwise noted."cfr_part: "465"---
Identifier
/us/cfr/t40/s465.13
Currency
2026-04-05
Positive Law
No
Updated
2026-04-05
Chapter
Environmental Protection Agency
Authority
Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act o... Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.
# 465.13 New source performance standards.The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:Subpart A| | | | | || --- | --- | --- | --- | --- || | mg/m (pounds per 1 million ft ) of area processed | | | || Chromium | 0.12 | (0.024) | 0.047 | (0.01) || Cyanide | 0.063 | (0.013) | 0.025 | (0.005) || Zinc | 0.33 | (0.066) | 0.14 | (0.027) || Iron | 0.39 | (0.086) | 0.20 | (0.041) || Oil and grease | 3.16 | (0.65) | 3.16 | (0.65) || TSS | 4.74 | (0.97) | 3.79 | (0.78) || pH | () | () | () | () || Within the range of 7.5 to 10.0 at all times. | | | | |[47 FR 54244, Dec. 1, 1982; 49 FR 33648, Aug. 24, 1984]