40 CFR § 465.24 - Pretreatment standards for existing sources.
---identifier: "/us/cfr/t40/s465.24"source: "ecfr"legal_status: "authoritative_unofficial"title: "40 CFR § 465.24 - Pretreatment standards for existing sources."title_number: 40title_name: "Protection of Environment"section_number: "465.24"section_name: "Pretreatment standards for existing sources."chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"subchapter_number: "N"subchapter_name: "EFFLUENT GUIDELINES AND STANDARDS"part_number: "465"part_name: "COIL COATING POINT SOURCE CATEGORY"positive_law: falsecurrency: "2026-04-05"last_updated: "2026-04-05"format_version: "1.1.0"generator: "[email protected]"authority: "Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217."regulatory_source: "47 FR 54244, Dec. 1, 1982, unless otherwise noted."cfr_part: "465"---
Identifier
/us/cfr/t40/s465.24
Currency
2026-04-05
Positive Law
No
Updated
2026-04-05
Chapter
Environmental Protection Agency
Authority
Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act o... Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.
# 465.24 Pretreatment standards for existing sources.Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in coil coating process wastewater introduced into a POTW shall not exceed the following values:Subpart B| | | | | || --- | --- | --- | --- | --- || | mg/m (pounds per 1 million ft) of area processed | | | || Chromium | 0.37 | (0.077) | 0.16 | (0.031) || Copper | 1.71 | (0.35) | 0.90 | (0.19) || Cyanide | 0.26 | (0.053) | 0.11 | (0.022) || Zinc | 1.20 | (0.25) | 0.51 | (0.11) |[47 FR 54244, Dec. 1, 1982; 49 FR 33648, Aug. 24, 1984]