40 CFR § 60.333 - Standard for sulfur dioxide.

---
identifier: "/us/cfr/t40/s60.333"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "40 CFR § 60.333 - Standard for sulfur dioxide."
title_number: 40
title_name: "Protection of Environment"
section_number: "60.333"
section_name: "Standard for sulfur dioxide."
chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"
subchapter_number: "C"
subchapter_name: "AIR PROGRAMS"
part_number: "60"
part_name: "STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 7401"
regulatory_source: "36 FR 24877, Dec. 23, 1971, unless otherwise noted."
cfr_part: "60"
---


# 60.333 Standard for sulfur dioxide.

Except as provided in paragraph (c) of this section, on and after the date on which the performance test required to be conducted by § 60.8 is completed, every owner or operator subject to the provisions of this subpart shall comply with one or the other of the following conditions in paragraphs (a) and (b) of this section:

(a) No owner or operator subject to the provisions of this subpart shall cause to be discharged into the atmosphere from any stationary gas turbine any gases which contain sulfur dioxide in excess of 0.015 percent by volume at 15 percent oxygen and on a dry basis; or

(b) No owner or operator subject to the provisions of this subpart shall burn in any stationary gas turbine any fuel which contains total sulfur in excess of 0.8 percent by weight (8000 ppmw).

(c) Stationary gas turbines subject to either subpart J or Ja of this part are not subject to the SO<sub>2</sub> standards in this subpart.

[44 FR 52798, Sept. 10, 1979, as amended at 69 FR 41360, July 8, 2004; 91 FR 1976, Jan. 15, 2026]