40 CFR § 60.460 - Applicability and designation of affected facility.
---
identifier: "/us/cfr/t40/s60.460"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "40 CFR § 60.460 - Applicability and designation of affected facility."
title_number: 40
title_name: "Protection of Environment"
section_number: "60.460"
section_name: "Applicability and designation of affected facility."
chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"
subchapter_number: "C"
subchapter_name: "AIR PROGRAMS"
part_number: "60"
part_name: "STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 7401"
regulatory_source: "36 FR 24877, Dec. 23, 1971, unless otherwise noted."
cfr_part: "60"
---
# 60.460 Applicability and designation of affected facility.
(a) The provisions of this subpart apply to the following affected facilities in a metal coil surface coating operation: each prime coat operation, each finish coat operation, and each prime and finish coat operation combined when the finish coat is applied wet on wet over the prime coat and both coatings are cured simultaneously.
(b) This subpart applies to any facility identified in paragraph (a) of this section that commences construction, modification, or reconstruction after January 5, 1981.