40 CFR § 60.5165 - What emission limits and standards must I meet and by when?
---
identifier: "/us/cfr/t40/s60.5165"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "40 CFR § 60.5165 - What emission limits and standards must I meet and by when?"
title_number: 40
title_name: "Protection of Environment"
section_number: "60.5165"
section_name: "What emission limits and standards must I meet and by when?"
chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"
subchapter_number: "C"
subchapter_name: "AIR PROGRAMS"
part_number: "60"
part_name: "STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 7401"
regulatory_source: "36 FR 24877, Dec. 23, 1971, unless otherwise noted."
cfr_part: "60"
---
# 60.5165 What emission limits and standards must I meet and by when?
You must meet the emission limits and standards specified in Table 2 or 3 to this subpart by the final compliance date under the approved state plan, Federal plan, or delegation, as applicable. The emission limits and standards apply at all times the unit is operating and during periods of malfunction. The emission limits and standards apply to emissions from a bypass stack or vent while sewage sludge is in the combustion chamber (*i.e.,* until the sewage sludge feed to the combustor has been cut off for a period of time not less than the sewage sludge incineration residence time).