40 CFR § 610.13 - Program structure.

---
identifier: "/us/cfr/t40/s610.13"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "40 CFR § 610.13 - Program structure."
title_number: 40
title_name: "Protection of Environment"
section_number: "610.13"
section_name: "Program structure."
chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"
subchapter_number: "Q"
subchapter_name: "ENERGY POLICY"
part_number: "610"
part_name: "FUEL ECONOMY RETROFIT DEVICES"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "Sec. 511, Motor Vehicle Information and Cost Savings Act, as amended (sec. 301, Pub. L. 94-163, 89 Stat. 915 (15 U.S.C. 2011))."
regulatory_source: "44 FR 17946, Mar. 23, 1979, unless otherwise noted."
cfr_part: "610"
---


# 610.13 Program structure.

(a) Each device evaluation program will consist of up to three phases:

(1) A preliminary analysis of available information and test data on the device to be performed by the EPA Administrator;

(2) Designing and conducting of a sequence of tests to determine device effectiveness if considered necessary by virtue of the Administrator's preliminary analysis; and

(3) Publication in the *Federal Register,* and submission to the Department of Transportation and to the Federal Trade Commission, of a summary of the results of any tests conducted under subparts C through F, or if none were conducted, then a summary of the results of the preliminary analysis conducted under subpart B; together with the Administrator's conclusions as to the effect of the tested retrofit device on fuel economy and exhaust emissions, and as to any other information that the Administrator determines is relevant in evaluating such device.

(b) Each of the above phases may, as appropriate, include the use of statistically valid sample sizes and statistical evaluation of measured results.