40 CFR § 63.1186 - How may I change the compliance levels of monitored parameters?
---
identifier: "/us/cfr/t40/s63.1186"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "40 CFR § 63.1186 - How may I change the compliance levels of monitored parameters?"
title_number: 40
title_name: "Protection of Environment"
section_number: "63.1186"
section_name: "How may I change the compliance levels of monitored parameters?"
chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"
subchapter_number: "C"
subchapter_name: "AIR PROGRAMS"
part_number: "63"
part_name: "NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 7401"
regulatory_source: "57 FR 61992, Dec. 29, 1992, unless otherwise noted."
cfr_part: "63"
---
# 63.1186 How may I change the compliance levels of monitored parameters?
You may change control device and process operating parameter levels established during performance tests and used to monitor compliance if you do the following:
(a) You must notify the Administrator of your desire to expand the range of a control device or process operating parameter level.
(b) Upon approval from the Administrator, you must conduct additional performance tests at the proposed new control device or process operating parameter levels. Before operating at these levels, the performance test results must verify that, at the new levels, you comply with the emission limits in §§ 63.1178 and 63.1179 of this subpart.