40 CFR § 63.2267 - Initial compliance demonstration for a reconstituted wood product press or board cooler.
---
identifier: "/us/cfr/t40/s63.2267"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "40 CFR § 63.2267 - Initial compliance demonstration for a reconstituted wood product press or board cooler."
title_number: 40
title_name: "Protection of Environment"
section_number: "63.2267"
section_name: "Initial compliance demonstration for a reconstituted wood product press or board cooler."
chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"
subchapter_number: "C"
subchapter_name: "AIR PROGRAMS"
part_number: "63"
part_name: "NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 7401"
regulatory_source: "57 FR 61992, Dec. 29, 1992, unless otherwise noted."
cfr_part: "63"
---
# 63.2267 Initial compliance demonstration for a reconstituted wood product press or board cooler.
If you operate a reconstituted wood product press at a new or existing affected source or a reconstituted wood product board cooler at a new affected source, then you must either use a wood products enclosure as defined in § 63.2292 or measure the capture efficiency of the capture device for the press or board cooler using Methods 204 and 204A through 204F of 40 CFR part 51, appendix M (as appropriate), or using the alternative tracer gas method contained in appendix A to this subpart. You must submit documentation that the wood products enclosure meets the press enclosure design criteria in § 63.2292 or the results of the capture efficiency verification with your Notification of Compliance Status.