40 CFR § 63.6009 - What emission limits must I meet for rubber processing affected sources?
---
identifier: "/us/cfr/t40/s63.6009"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "40 CFR § 63.6009 - What emission limits must I meet for rubber processing affected sources?"
title_number: 40
title_name: "Protection of Environment"
section_number: "63.6009"
section_name: "What emission limits must I meet for rubber processing affected sources?"
chapter_name: "ENVIRONMENTAL PROTECTION AGENCY"
subchapter_number: "C"
subchapter_name: "AIR PROGRAMS"
part_number: "63"
part_name: "NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "42 U.S.C. 7401"
regulatory_source: "57 FR 61992, Dec. 29, 1992, unless otherwise noted."
cfr_part: "63"
---
# 63.6009 What emission limits must I meet for rubber processing affected sources?
(a) You must meet the emission limit for total hydrocarbons (THC) and either total metal HAP or the alternative emission limit for filterable particulate matter (fPM) in table 15 to this subpart that applies to you. You may choose to comply with each emission limit for each rubber processing mixer separately or for a group of rubber processing mixers routed to the same control device or stack, or with an alternative for all mixers combined based on a facility-wide average.
(b) You must also meet each operating limit in table 16 to this subpart that applies to you.
[89 FR 94909, Nov. 29, 2024]