# 721.12074 Halosubstituted carbopolycycle, polymer with substituted carbomonocycles and oxybis[alkanol] (generic).
(a) *Chemical substance and significant new uses subject to reporting.* (1) The chemical substance identified generically as halosubstituted carbopolycycle, polymer with substituted carbomonocycles and oxybis[alkanol] (PMN P-23-72) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. The requirements of this section do not apply to quantities of the substance after they have been completely reacted or cured.
(2) The significant new uses are:
(i) *Protection in the workplace.* Requirements as specified in § 721.63(a)(1), (a)(3) through (6), (b), and (c). When determining which persons are reasonably likely to be exposed as required for § 721.63(a)(1) and (a)(4), engineering control measures (*e.g.,* enclosure or confinement of the operation, general and local ventilation) or administrative control measures (*e.g.,* workplace policies and procedures) shall be considered and implemented to prevent exposure, where feasible. For purposes of § 721.63(a)(5), respirators must provide a National Institute for Occupational Safety and Health (NIOSH) assigned protection factor (APF) of at least 10. For purposes of § 721.63(b), the concentration is set at 0.1%.
(ii) *Hazard communication.* Requirements as specified in § 721.72(a) through (f), (g)(1), (g)(3)(iii), and (g)(5). For purposes of § 721.72(e), the concentration is set at 0.1%. For purposes of § 721.72(g)(1), this substance may cause: genetic toxicity, carcinogenicity, and specific target organ toxicity. Alternative hazard and warning statements that meet the criteria of the Globally Harmonized System and OSHA Hazard Communication Standard may be used.
(iii) *Industrial, commercial, and consumer activities.* Requirements as specified in § 721.80(o). It is a significant new use to process for use or use the substance other than in an enclosed roll-coating lithographic printing machine. It is a significant new use to process for use or use the substance at a concentration in the final formulation that exceeds 40% by weight for a coating application.
(iv) *Disposal.* Requirements as specified in § 721.85(a)(2), (b)(2), and (c)(2).
(v) *Release to water.* Requirements as specified in § 721.90(a)(1), (b)(1), and (c)(1).
(b) *Specific requirements.* The provisions of Subpart A of this part apply to this section except as modified by this paragraph (b).
(1) *Recordkeeping.* Recordkeeping requirements as specified in § 721.125(a) through (k) are applicable to manufacturers, importers, and processors of this substance.
(2) *Limitation or revocation of certain notification requirements.* The provisions of § 721.185 apply to this section.
[90 FR 33287, July 17, 2025]