# 154.1400 Safety equipment: All vessels.
(a) Instead of the equipment under § 35.30-20 of this chapter, a vessel of less than 25,000 m
<sup>3</sup> cargo capacity must have the following personnel safety equipment:
(1) Six self-contained, pressure-demand-type, air-breathing apparatus approved by the Mining Enforcement and Safety Administration (MESA) or the National Institute for Occupational Safety and Health (NIOSH), each having at least a 30 minute capacity.
(2) Nine spare bottles of air for the self-contained air-breathing apparatus, each having at least a 30 minute capacity.
(3) Six steel-cored lifelines.
(4) Six Type II or Type III flashlights constructed and marked in accordance with ASTM F 1014 (incorporated by reference, see § 154.1).
(5) Three fire axes.
(6) Six helmets that meet ANSI Safety Requirements for Industrial Head Protection, Z-89.1 (1969).
(7) Six sets of boots and gloves that are made of rubber or other electrically non-conductive material.
(8) Six sets of goggles that meet the specifications of ANSI Practice for Occupational and Educational Eye and Face Protection, Z-87.1 (1979).
(9) Three outfits that protect the skin from scalding steam and the heat of a fire, and that have a water resistant outer surface.
(10) Three chemical protective outfits that protect the wearers from the particular personnel hazards presented by the cargo vapor.
(b) Instead of the equipment under § 35.30-20 of this chapter, a vessel of 25,000 m
<sup>3</sup> cargo capacity or more must have the following personnel safety equipment:
(1) Eight self-contained, pressure-demand-type, air-breathing apparatus approved by the Mining Enforcement and Safety Administration (MESA) or the National Institute for Occupational Safety and Health (NIOSH), each having at least a 30 minute capacity.
(2) Nine spare bottles of air for the self-contained air-breathing apparatus, each having at least a 30 minute capacity.
(3) Eight steel-cored lifelines.
(4) Eight Type II or Type III flashlights constructed and marked in accordance with ASTM F 1014 (incorporated by reference, see § 154.1).
(5) Three fire axes.
(6) Eight helmets that meet ANSI Safety Requirements for Industrial Head Protection, Z-89.1 (1969).
(7) Eight sets of boots and gloves that are made of rubber or other electrically non-conductive material.
(8) Eight sets of goggles that meet the specifications of ANSI Practice for Occupational and Educational Eye and Face Protection, Z-87.1 (1979).
(9) Five outfits that protect the skin from scalding steam and the heat of a fire, and that have a water resistant outer surface.
(10) Three chemical protective outfits that protect the wearers from the particular personnel hazards presented by the cargo vapor.
(c) When Table 4 references this section, a vessel carrying the listed cargo must have the following additional personnel protection equipment:
(1) Three self-contained, pressure-demand-type, air-breathing apparatus approved by the Mining Enforcement and Safety Administration (MESA) or the National Institute for Occupational Safety and Health (NIOSH), each having at least a 30 minute capacity.
(2) Nine spare bottles of air for the self-contained air-breathing apparatus, each having at least a 30 minute capacity.
(3) Three steel-cored lifelines.
(4) Three Type II or Type III flashlights constructed and marked in accordance with ASTM F 1014 (incorporated by reference, see § 154.1).
(5) Three helmets that meet ANSI Safety Requirements for Industrial Head Protection, Z-89.1 (1969).
(6) Three sets of boots and gloves that are made of rubber or other electrically non-conductive material.
(7) Three sets of goggles that meet the specifications of ANSI Practice for Occupational and Educational Eye and Face Protection, Z-87.1 (1979).
(8) Three chemical protective outfits that protect the wearers from the particular personnel hazards presented by the cargo vapor.
[CGD 74-289, 44 FR 26009, May 3, 1979, as amended by CGD 77-069, 52 FR 31630, Aug. 21, 1987; CGD 82-042, 17705, May 18, 1988; USCG-1999-5151, 64 FR 67183, Dec. 1, 1999]