Title 46, Part 54 — Pressure Vessels
57 sections
Section 54.01-1
Incorporation by reference.
Section 54.01-2
Adoption of Division 1 of Section VIII of the ASME BPVC.
Section 54.01-5
Scope (modifies U-1 and U-2).
Section 54.01-10
Steam-generating pressure vessels (modifies U-1(g)).
Section 54.01-15
Exemptions from shop inspection and plan approval (modifies U-1(c)(2)).
Section 54.01-17
Pressure vessel for human occupancy (PVHO).
Section 54.01-18
Plan approval.
Section 54.01-25
Miscellaneous pressure components (modifies UG-11).
Section 54.01-30
Loadings (modifies UG-22).
Section 54.01-35
Corrosion (modifies UG-25).
Section 54.01-40
External pressure (modifies UG-28).
Section 54.03-1
Scope.
Section 54.03-5
General.
Section 54.05-1
Scope (replaces UG-84).
Section 54.05-3
Tests required.
Section 54.05-5
Toughness test specimens.
Section 54.05-6
Toughness test temperatures.
Section 54.05-10
Certification of material toughness tests.
Section 54.05-15
Weldment toughness tests—procedure qualifications.
Section 54.05-16
Production toughness testing.
Section 54.05-17
Weld toughness test acceptance criteria.
Section 54.05-20
Impact test properties for service of 0 °F and below.
Section 54.05-25
[Reserved]
Section 54.05-30
Allowable stress values at low temperatures.
Section 54.10-1
Scope (modifies UG-90 through UG-103 and UG-115 through UG-120).
Section 54.10-3
Marine inspectors and Coast Guard Symbol stamping (replaces UG-90 and UG-91, and modifies UG-92 through UG-103).
Section 54.10-5
Maximum allowable working pressure (reproduces UG-98).
Section 54.10-10
Standard hydrostatic test (modifies UG-99).
Section 54.10-15
Pneumatic test (modifies UG-100).
Section 54.10-20
Marking and stamping.
Section 54.10-25
Manufacturers' data report forms (modifies UG-120).
Section 54.15-1
General (modifies UG-125 through UG-137).
Section 54.15-3
Definitions (modifies appendix 3).
Section 54.15-5
Protective devices (modifies UG-125).
Section 54.15-10
Safety and relief valves (modifies UG-126).
Section 54.15-13
Rupture disks (modifies UG-127).
Section 54.15-15
Relief devices for unfired steam boilers, evaporators, and heat exchangers (modifies UG-126).
Section 54.15-25
Minimum relief capacities for cargo tanks containing compressed or liquefied gas.
Section 54.20-1
Scope (modifies UW-1 through UW-65).
Section 54.20-2
Fabrication for hazardous materials (replaces UW-2(a)).
Section 54.20-3
Design (modifies UW-9, UW-11(a), UW-13, and UW-16).
Section 54.20-5
Welding qualification tests and production testing (modifies UW-26, UW-28, UW-29, UW-47, and UW-48).
Section 54.23-1
Scope (modifies UB-1).
Section 54.25-1
Scope.
Section 54.25-3
Steel plates (modifies UCS-6).
Section 54.25-5
Corrosion allowance.
Section 54.25-7
Requirement for postweld heat treatment (modifies UCS-56).
Section 54.25-8
Radiography (modifies UW-11(a), UCS-57, UNF-57, UHA-33, and UHT-57).
Section 54.25-10
Low temperature operation—ferritic steels (replaces UCS-65 through UCS-67).
Section 54.25-15
Low temperature operation—high alloy steels (modifies UHA-23(b) and UHA-51).
Section 54.25-20
Low temperature operation—ferritic steels with properties enhanced by heat treatment (modifies UHT-5(c), UHT-6, UHT-23, and UHT-82).
Section 54.25-25
Welding of quenched and tempered steels (modifies UHT-82).
Section 54.30-1
Scope.
Section 54.30-3
Introduction.
Section 54.30-5
Limitations and requirements.
Section 54.30-10
Method of performing mechanical stress relief.
Section 54.30-15
Requirement for analysis and computation.