49 CFR § 178.33-6 - Manufacture.

---
identifier: "/us/cfr/t49/s178.33-6"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "49 CFR § 178.33-6 - Manufacture."
title_number: 49
title_name: "Transportation"
section_number: "178.33-6"
section_name: "Manufacture."
chapter_name: "PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION"
subchapter_number: "C"
subchapter_name: "HAZARDOUS MATERIALS REGULATIONS"
part_number: "178"
part_name: "SPECIFICATIONS FOR PACKAGINGS"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97."
cfr_part: "178"
---


# 178.33-6 Manufacture.

(a) By appliances and methods that will assure uniformity of completed containers; dirt and scale to be removed as necessary; no defect acceptable that is likely to weaken the finished container appreciably; reasonably smooth and uniform surface finish required.

(b) Seams when used must be as follows:

(1) Circumferential seams: By welding, swedging, brazing, soldering, or double seaming.

(2) Side seams: By welding, brazing, or soldering.

(c) Ends: The ends shall be of pressure design.

[29 FR 18823, Dec. 29, 1964, as amended by Order 71, 31 FR 9074, July 1, 1966. Redesignated at 32 FR 5606, Apr. 5, 1967]