49 CFR § 179.201-9 - Gauging device.

---
identifier: "/us/cfr/t49/s179.201-9"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "49 CFR § 179.201-9 - Gauging device."
title_number: 49
title_name: "Transportation"
section_number: "179.201-9"
section_name: "Gauging device."
chapter_name: "PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION"
subchapter_number: "C"
subchapter_name: "HAZARDOUS MATERIALS REGULATIONS"
part_number: "179"
part_name: "SPECIFICATIONS FOR TANK CARS"
positive_law: false
currency: "2026-03-24"
last_updated: "2026-03-24"
format_version: "1.1.0"
generator: "[email protected]"
authority: "49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97."
regulatory_source: "29 FR 18995, Dec. 29, 1964, unless otherwise noted. Redesignated at 32 FR 5606, Apr. 5, 1967."
cfr_part: "179"
---


# 179.201-9 Gauging device.

A gauging device of an approved design must be applied to permit determining the liquid level of the lading. The gauging device must be made of materials not subject to rapid deterioration by the lading. When the interior pipe of the gauging device provides a means for passage of the lading from the interior to the exterior of the tank, it must be equipped with an excess flow valve of an approved design. If the opening for passage of lading through the gauging device is not more than 0.060 inch diameter an excess flow valve is not required. The gauging device must be provided with a protective housing.

[Amdt. 179-10, 36 FR 21353, Nov. 6, 1971]