Skip to content
LexBuild

Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes

---
identifier: "/us/fr/03-23669"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes"
title_number: 0
title_name: "Federal Register"
section_number: "03-23669"
section_name: "Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes"
positive_law: false
currency: "2003-09-17"
last_updated: "2003-09-17"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Transportation Department"
document_number: "03-23669"
document_type: "rule"
publication_date: "2003-09-17"
agencies:
  - "Transportation Department"
  - "Federal Aviation Administration"
cfr_references:
  - "14 CFR Part 39"
rin: "2120-AA64"
fr_citation: "68 FR 54327"
fr_volume: 68
docket_ids:
  - "Docket No. 2001-NM-322-AD"
  - "Amendment 39-13221"
  - "AD 2003-14-02"
effective_date: "2003-08-14"
fr_action: "Final rule; correction."
---

#  [Corrected]

**AGENCY:**

Federal Aviation Administration, DOT.

**ACTION:**

Final rule; correction.

**SUMMARY:**

This document corrects typographical errors that appeared in airworthiness directive (AD) 2003-14-02 that was published as a final rule; correction in the *Federal Register* on August 15, 2003 (68 FR 48783). The typographical errors resulted in an incorrect AD number and effective date. This AD is applicable to certain Bombardier Model CL-600-2B19 (Regional Jet series 100 & 440) airplanes. This AD requires a one-time inspection of the aft edge of the left and right main windshields to determine whether a certain placard is installed, and corrective actions if necessary.

**DATES:**

Effective August 14, 2003.

**FOR FURTHER INFORMATION CONTACT:**

Serge Napoleon, Aerospace Engineer, Airframe and Propulsion Branch, ANE-171, FAA, New York Aircraft Certification Office, 10 Fifth Street, Third Floor, Valley Stream, New York 11581; telephone (516) 256-7512; fax (516) 568-2716.

**SUPPLEMENTARY INFORMATION:**

Airworthiness Directive (AD) 2003-14-02, amendment 39-13221, applicable to certain Bombardier Model CL-600-2B19 (Regional Jet series 100 & 440) airplanes, was published as a final rule; correction in the *Federal Register* on August 15, 2003 (68 FR 48783). That AD requires a one-time inspection of the aft edge of the left and right main windshields to determine whether a certain placard is installed, and corrective actions if necessary.

As published, that final rule; correction incorrectly specified the AD number as “2003-14-02 R1” instead of “2003-14-02” and the effective date as “August 11, 2003” instead of “August 14, 2003.”

Since no other part of the regulatory information has been changed, the final rule is not being republished in the *Federal Register* .

The effective date of this AD remains August 14, 2003.

**14 CFR Part 39**

§ 39.13

On page 48783, in the third column, paragraph 2 of Part 39—Airworthiness Directives is corrected to read as follows:

2. Section 39.13 is amended by correctly adding the following airworthiness directive (AD):

*AD 2003-14-02 Bombardier, Inc.* (Formerly Canadair): Amendment 39-13221. Docket 2001-NM-322-AD.

**14 CFR Part 39**

On page 48784, in the second column, paragraph (e) of AD 2003-14-02 is corrected to read as follows:

(e) The effective date of this amendment remains August 14, 2003.

Issued in Renton, Washington, on September 11, 2003.

Vi L. Lipski,

Manager, Transport Airplane Directorate, Aircraft Certification Service.