Federal Motor Vehicle Safety Standards

---
identifier: "/us/fr/05-55519"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Federal Motor Vehicle Safety Standards"
title_number: 0
title_name: "Federal Register"
section_number: "05-55519"
section_name: "Federal Motor Vehicle Safety Standards"
positive_law: false
currency: "2005-12-12"
last_updated: "2005-12-12"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Transportation Department"
document_number: "05-55519"
document_type: "rule"
publication_date: "2005-12-12"
agencies:
  - "Transportation Department"
  - "National Highway Traffic Safety Administration"
cfr_references:
  - "49 CFR Part 571"
fr_citation: "70 FR 73383"
fr_volume: 70
---


#  Standard No. 111; Rearview mirrors.

**CFR Correction**

In Title 49 of the Code of Federal Regulations, Parts 400 to 599, revised as of October 1, 2005, on page 384, in § 571.111, add S9.4 to read as follows:

§ 571.111

S9.4(a) Each image required by S9.3(a)(1) to be visible at the driver's eye location shall be separated from the edge of the effective mirror surface of the mirror providing that image by a distance of not less than 3 minutes of arc.

(b) The image required by S9.3(a)(1) of cylinder P shall meet the following requirements:

(1) The angular size of the shortest dimension of that cylinder's image shall be not less than 3 minutes of arc; and

(2) The angular size of the longest dimension of that cylinder's image shall be not less than 9 minutes of arc.