Skip to content
LexBuild

Airworthiness Directives; Airbus Model A310 Series Airplanes

---
identifier: "/us/fr/Z8-19715"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Airworthiness Directives; Airbus Model A310 Series Airplanes"
title_number: 0
title_name: "Federal Register"
section_number: "Z8-19715"
section_name: "Airworthiness Directives; Airbus Model A310 Series Airplanes"
positive_law: false
currency: "2008-09-08"
last_updated: "2008-09-08"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Transportation Department"
document_number: "Z8-19715"
document_type: "proposed_rule"
publication_date: "2008-09-08"
agencies:
  - "Transportation Department"
  - "Federal Aviation Administration"
cfr_references:
  - "14 CFR Part 39"
rin: "2120-AA64"
fr_citation: "73 FR 51961"
fr_volume: 73
docket_ids:
  - "Docket No. FAA-2008-0908"
  - "Directorate Identifier 2007-NM-190-AD"
---

#  [Corrected]

**Correction**

In proposed rule document E8-19715 beginning on page 50250 in the issue of Tuesday, August 26, 2008, make the following correction:

§39.13

On page 50253, in §39.13, Table 1 should read as set forth below:

|  |  |  |  |
| --- | --- | --- | --- |
| For model— | Repeat the inspection at the later of the following times— | And thereafter at intervals not to exceed— |  |
| (1) A310-200 series airplanes | Within 950 flight cycles or 1,900 flight hours since the last inspection required by paragraph (f)(1)(i) or (i) of this AD, whichever occurs first | Within 50 flight cycles or 250 flight hours after the effective date of this AD, whichever occurs first | 950 flight cycles or 1,900 flight hours, whichever occurs first. |
| (2) A310-300 series airplanes (short range) | Within 900 flight cycles or 2,550 flight hours since the last inspection required by paragraph (f)(1)(ii) or (i) of this AD, whichever occurs first | Within 50 flight cycles or 250 flight hours after the effective date of this AD, whichever occurs first | 900 flight cycles or 2,550 flight hours, whichever occurs first. |
| (3) A310-300 series airplanes (long range) | Within 800 flight cycles or 4,000 flight hours since the last inspection required by paragraph (f)(1)(ii) or (i) of this AD, whichever occurs first | Within 50 flight cycles or 250 flight hours after the effective date of this AD, whichever occurs first | 800 flight cycles or 4,000 flight hours, whichever occurs first. |