Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components, Correction

---
identifier: "/us/fr/E9-17918"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components, Correction"
title_number: 0
title_name: "Federal Register"
section_number: "E9-17918"
section_name: "Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components, Correction"
positive_law: false
currency: "2009-07-28"
last_updated: "2009-07-28"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Transportation Department"
document_number: "E9-17918"
document_type: "rule"
publication_date: "2009-07-28"
agencies:
  - "Transportation Department"
  - "National Highway Traffic Safety Administration"
cfr_references:
  - "49 CFR Part 571"
rin: "2127-AK35"
fr_citation: "74 FR 37176"
fr_volume: 74
docket_ids:
  - "Docket No. NHTSA-2009-0116"
effective_date: "2009-09-01"
fr_action: "Final rule; correction."
---


#  Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components, Correction

**AGENCY:**

National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT).

**ACTION:**

Final rule; correction.

**SUMMARY:**

NHTSA published in the *Federal Register* of July 20, 2009, a document delaying the compliance date of the sliding door provisions of a February 6, 2007 final rule. The regulatory text adopted by that document contained errors. This document corrects those errors.

**DATES:**

Effective on September 1, 2009.

**FOR FURTHER INFORMATION CONTACT:**

Ms. Sarah Alves, NHTSA Office of the Chief Counsel, DOT, 1200 New Jersey Avenue, SE., Washington, DC 20590, telephone (202) 366-2992, fax (202) 366-3820.

**SUPPLEMENTARY INFORMATION:**

**Background**

NHTSA published in the *Federal Register* of July 20, 2009 (74 FR 35131), a document delaying the compliance date of the sliding door provisions of a February 6, 2007 final rule (FR Doc. E9-17078). In the regulatory text adopted by that document, in S4.2.2.3, a statement erroneously reads: “This S4.2.2.3 applies to vehicle manufactured on or after September 1, 2010.” The statement should read: “This S4.2.2 applies to vehicles manufactured on or after September 1, 2010.” This document corrects that error.

**Correction of Publication**

In rule FR Doc. E9-17078 published on July 20, 2009 (74 FR 35131), make the following correction. On page 35135, in the third column, S4.2.2.3 is corrected to read as follows:

S4.2.2.3 This S4.2.2 applies to vehicles manufactured on or after September 1, 2010.

Issued: July 23, 2009.

Stephen R. Kratzke,

Associate Administrator for Rulemaking.