Safety Standard for Toddler Beds

---
identifier: "/us/fr/C1-2011-9421"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Safety Standard for Toddler Beds"
title_number: 0
title_name: "Federal Register"
section_number: "C1-2011-9421"
section_name: "Safety Standard for Toddler Beds"
positive_law: false
currency: "2011-05-13"
last_updated: "2011-05-13"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Consumer Product Safety Commission"
document_number: "C1-2011-9421"
document_type: "rule"
publication_date: "2011-05-13"
agencies:
  - "Consumer Product Safety Commission"
cfr_references:
  - "16 CFR Part 1217"
rin: "3041-AC79"
fr_citation: "76 FR 27882"
fr_volume: 76
---


#  [Corrected]

**Correction**

In rule document 2011-9421 beginning on page 22019 in the issue of Wednesday, April 20, 2011, make the following correction:

§ 1217.2

On page 22029, in § 1217.2(c)(6), at the bottom of the page, insert §§ 1217.2(c)(6)(iii), 1217.2(c)(6)(iv), and 1217.2(c)(7), which should read:

**16 CFR Part 1217**

(iii) 8.4.4 Toddler beds that convert from a full-size crib, also known as convertible cribs, must meet the warning requirements specified in section 8 of ASTM F 1169-10, instead of the requirements of 8.4.3. See 16 CFR Part 1219 for complete requirements for full-size cribs.

(iv) 8.4.5 Any toddler bed that can convert from a full-size crib, and has the warning specified in section 8.1.3 of ASTM F 1169-10, must include additional text at the end of that warning that specifies the minimum mattress thickness of 4 inches (100 mm). See 16 CFR Part 1219 for complete requirements for full-size cribs.

(7) In addition to figure 10 of ASTM F 1821-09, use the following: