The Commerce Control List

---
identifier: "/us/fr/2011-27751"
source: "fr"
legal_status: "authoritative_unofficial"
title: "The Commerce Control List"
title_number: 0
title_name: "Federal Register"
section_number: "2011-27751"
section_name: "The Commerce Control List"
positive_law: false
currency: "2011-10-26"
last_updated: "2011-10-26"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Commerce Department"
document_number: "2011-27751"
document_type: "rule"
publication_date: "2011-10-26"
agencies:
  - "Commerce Department"
  - "Industry and Security Bureau"
cfr_references:
  - "15 CFR Part 774"
fr_citation: "76 FR 66181"
fr_volume: 76
---


#  The Commerce Control List

**CFR Correction**

In Title 15 of the Code of Federal Regulations, Parts 300-799, revised as of January 1, 2011, on page 684, in Supplement No. 1 to Part 774, in ECCN 1C118, the “Items” paragraph is revised to read as follows:

**15 CFR Part 774**

**Supplement No. 1 to PART 774—THE COMMERCE CONTROL LIST**

*1C118 Titanium-stabilized duplex stainless steel (Ti-DSS), having all of the following characteristics (see List of Items Controlled).*

*Items:*

a. Having all of the following characteristics:

a.1. Containing 17.0-23.0 weight percent chromium and 4.5-7.0 weight percent nickel;

a.2. Having a titanium content of greater than 0.10 weight percent; and

a.3. A ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10 percent is austenite by volume (according to ASTM E-1181-87 or national equivalents), and

b. Having any of the following forms:

b.1. Ingots or bars having a size of 100 mm or more in each dimension;

b.2. Sheets having a width of 600 mm or more and a thickness of 3 mm or less; or

b.3. Tubes having an outer diameter of 600 mm or more and a wall thickness of 3 mm or less.