Energy Conservation Program: Test Procedure for Pumps; Correction

---
identifier: "/us/fr/2015-09566"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Energy Conservation Program: Test Procedure for Pumps; Correction"
title_number: 0
title_name: "Federal Register"
section_number: "2015-09566"
section_name: "Energy Conservation Program: Test Procedure for Pumps; Correction"
positive_law: false
currency: "2015-04-24"
last_updated: "2015-04-24"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Energy Department"
document_number: "2015-09566"
document_type: "proposed_rule"
publication_date: "2015-04-24"
agencies:
  - "Energy Department"
cfr_references:
  - "10 CFR Part 429"
  - "10 CFR Part 431"
rin: "1905-AD50"
fr_citation: "80 FR 22939"
fr_volume: 80
docket_ids:
  - "Docket No. EERE-2013-BT-TP-0055"
fr_action: "Notice of proposed rulemaking and public meeting; correction."
---


#  Energy Conservation Program: Test Procedure for Pumps; Correction

**AGENCY:**

Office of Energy Efficiency and Renewable Energy, Department of Energy.

**ACTION:**

Notice of proposed rulemaking and public meeting; correction.

**SUMMARY:**

On April 1, 2015, the U.S. Department of Energy (DOE) published in the *Federal Register* a notice of proposed rulemaking and public meeting for Energy Conservation Program: Test Procedure for Pumps. This document corrects terms in four equations.

**DATES:**

April 24, 2015.

**FOR FURTHER INFORMATION CONTACT:**

Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE-5B, 1000 Independence Avenue SW., Washington, DC 20585-0121. Telephone: (202) 586-6590. Email: *[email protected]* .

**Corrections**

In the *Federal Register* published on April 1, 2015, in FR Doc. 2015-06945, make the following corrections:

1. On page 17604: Equation (6) is corrected by removing “13.46” and adding in its place “17.80”. The corrected equation reads as follows:

**Appendix A to Subpart Y of Part 431—Uniform Test Method for the Measurement of Energy Consumption of Pumps. [Corrected]**

2. On page 17645: The equation in section II.B.1.1.1 is corrected by removing “13.46” and adding in its place “17.80”. The corrected equation reads as follows:

*η*<sub>pump,STD</sub> = −0.85 * In( *Q*<sub>100</sub>*%%* ) <sub>2</sub> − 0.38 * In( *N*<sub>S</sub> ) * In( *Q*<sub>100</sub>*%%* ) − 11.48 * In( *N*<sub>S</sub> ) <sub>2</sub> + 17.80 * In( *Q*<sub>100</sub>*%%* ) + 179.80 * In( *N*<sub>S</sub> ) − ( *C* − 555.6)

3. On page 17646: The equation in section III.D.1.2.1 is corrected by removing “MotorH” and adding in its place “MotorHP”. The corrected equation reads as follows:

4. On page 17648: The equation in section V.D.1.2.1 is corrected by removing “MotorHPMotorH” and adding in its place “MotorHP”. The corrected equation reads as follows:

Issued in Washington, DC, on April 20, 2015.

Kathleen B. Hogan,

Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and Renewable Energy.