Amendments to the HHS-Operated Risk Adjustment Data Validation Under the Patient Protection and Affordable Care Act's HHS-Operated Risk Adjustment Program
---
identifier: "/us/fr/C1-2020-11703"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Amendments to the HHS-Operated Risk Adjustment Data Validation Under the Patient Protection and Affordable Care Act's HHS-Operated Risk Adjustment Program"
title_number: 0
title_name: "Federal Register"
section_number: "C1-2020-11703"
section_name: "Amendments to the HHS-Operated Risk Adjustment Data Validation Under the Patient Protection and Affordable Care Act's HHS-Operated Risk Adjustment Program"
positive_law: false
currency: "2020-06-25"
last_updated: "2020-06-25"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Health and Human Services Department"
document_number: "C1-2020-11703"
document_type: "proposed_rule"
publication_date: "2020-06-25"
agencies:
- "Health and Human Services Department"
cfr_references:
- "45 CFR Part 153"
rin: "0938-AU23"
fr_citation: "85 FR 38107"
fr_volume: 85
docket_ids:
- "CMS-9913-P"
---
# Amendments to the HHS-Operated Risk Adjustment Data Validation Under the Patient Protection and Affordable Care Act's HHS-Operated Risk Adjustment Program
**Correction**
In proposed rule document 11703, appearing on pages 33595-33617, in the issue of Tuesday, June 2, 2020, make the following changes:
1. On page 33600, in the first column, on the third and fourth lines, the equation should read “If *GFR*<sub>G,i</sub> > *UB*<sub>G</sub> or *GFR*<sub>G,i</sub> < *LB*<sub>G</sub> , And if *Freq_EDGE*<sub>G,i</sub> ≥ 30”
2. On the same page, in the second column, in the seventh and eighth lines following the center-set equation, should read “ *AdjRS*<sub>i,e</sub> = *EdgeRS*<sub>i,e</sub> * (1 − *Adjustment*<sub>i,e</sub> )”.
3. On page 33608, in the first column, on the second line, the equation should read “ *GFR*<sub>G,i</sub> = *z*<sub>G,i</sub> * *Sd* { *GFR*<sub>G</sub> } + μ{ *GFR*<sub>G</sub> }”.
4. On page 33611, in the third column, on the first line, the equation should read “ *b*<sub>r</sub> = *outerZ*<sub>r</sub> − a * ( *outerZ*<sub>r</sub> ) = *outerZ*<sub>r</sub> * (1 − *a* )”.