Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments
---
identifier: "/us/fr/C1-2022-17031"
source: "fr"
legal_status: "authoritative_unofficial"
title: "Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments"
title_number: 0
title_name: "Federal Register"
section_number: "C1-2022-17031"
section_name: "Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments"
positive_law: false
currency: "2022-10-25"
last_updated: "2022-10-25"
format_version: "1.1.0"
generator: "[email protected]"
agency: "Transportation Department"
document_number: "C1-2022-17031"
document_type: "rule"
publication_date: "2022-10-25"
agencies:
- "Transportation Department"
- "Pipeline and Hazardous Materials Safety Administration"
cfr_references:
- "49 CFR Part 192"
rin: "2137-AF39"
fr_citation: "87 FR 64384"
fr_volume: 87
docket_ids:
- "Docket No. PHMSA-2011-0023"
- "Amdt. No. 192-132"
---
# Definitions. [Corrected]
**Correction**
In Rule Document 2022-17031, appearing on pages 52224-52279, in the issue of Wednesday, August 24, 2022, make the following correction:
**49 CFR Part 192**
On page 52267, in the third column, paragraph “(2)(i)” is corrected to read as set forth below.
§ 192.3
(2)(i) If the length of the wrinkle bend cannot be reliably determined, then w *rinkle bend* means a bend in the pipe where (h/D)*100 exceeds 2 when S is less than 37,000 psi (255 MPa), where (h/D)*100 exceeds (47000— *S* )/10,000 +1 for psi [324— *S* )/69 +1 for MPa] when S is greater than 37,000 psi (255 MPa) but less than 47,000 psi (324 MPa), and where (h/D)*100 exceeds 1 when S is 47,000 psi (324 MPa) or more.