# Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation of Antidumping Duty Orders
**AGENCY:**
Enforcement and Compliance, International Trade Administration, Department of Commerce.
**SUMMARY:**
As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) orders on stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD orders.
**DATES:**
Applicable April 12, 2023.
**FOR FURTHER INFORMATION CONTACT:**
Emily Bradshaw, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-3896.
**SUPPLEMENTARY INFORMATION:**
**Background**
On February 23, 2001, Commerce published in the *Federal Register* the AD orders on stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines. [^1] On November 1, 2022, the ITC instituted, and Commerce initiated, the fourth sunset review of the *Orders,* pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). [^2] As a result of its reviews, Commerce determined that revocation of the *Orders* would likely lead to the continuation or recurrence of dumping, and therefore, notified the ITC of the magnitude of the margins of dumping likely to prevail should the *Orders* be revoked. [^3]
[^1]*See Antidumping Duty Orders: Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines,* 66 FR 11257 (February 23, 2001) ( *Orders* ).
[^2]*See Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines; Institution of Five-Year Reviews,* 87 FR 65819 (November 1, 2022); and *Initiation of Five-Year (Sunset) Reviews,* 87 FR 65746 (November 1, 2022).
[^3]* See Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines: Final Results of the Expedited Fourth Sunset Review of the Antidumping Duty Orders,* 88 FR 14136 (March 7, 2023), and accompanying Issues and Decision Memorandum.
On April 6, 2023, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the *Orders* would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. [^4]
[^4]*See Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines; Determinations,* 88 FR 20552 (April 6, 2023).
**Scope of the Orders**
The scope of the *Orders* cover butt-weld fittings. Butt-weld fittings are under 14 inches in outside diameter (based on nominal pipe size), whether finished or unfinished. The product encompasses all grades of stainless steel and “commodity” and “specialty” fittings. Specifically excluded from the definition are threaded, grooved, and bolted fittings, and fittings made from any material other than stainless steel. The butt-weld fittings subject to these *Orders* are generally designated under specification ASTM A403/A403M, the standard specification for Wrought Austenitic Stainless Steel Piping Fittings, or its foreign equivalents ( *e.g.,* DIN or JIS specifications). This specification covers two general classes of fittings, WP and CR, of wrought austenitic stainless-steel fittings of seamless and welded construction covered by the latest revision of ANSI B16.9, ANSI B16.11, and ANSI B16.28. Butt-weld fittings manufactured to specification ASTM A774, or its foreign equivalents, are also covered by the *Orders.* These *Orders* do not apply to cast fittings. Cast austenitic stainless steel pipe fittings are covered by specifications A351/A351M, A743/743M, and A744/A744M. The butt-weld fittings subject to these *Orders* are currently classifiable under subheading 7307.23.0000 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of these *Orders* is dispositive.
**Continuation of the Orders**
As a result of the determinations by Commerce and the ITC that revocation of the *Orders* would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the *Orders.* U.S. Customs and Border Protection will continue to collect AD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the *Orders* will be the date of publication in the *Federal Register* of this notice of continuation. Commerce intends to initiate the next five-year reviews of the *Orders* not later than 30 days prior to the fifth anniversary of the effective date of continuation.
**Administrative Protective Order**
This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the return/destruction or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply with the regulations and terms of the APO is a sanctionable violation.
**Notification to Interested Parties**
These five-year (sunset) reviews and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act, and 19 CFR 351.218(f)(4).
Dated: April 6, 2023.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement and Compliance.