# Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).
**AGENCY:**
Environmental Protection Agency (EPA).
**ACTION:**
Final rule.
**SUMMARY:**
This regulation establishes an exemption from the requirement of a tolerance for residues of various fragrance components listed in Unit II of this document when used as an inert ingredient in antimicrobial formulations applied to food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils under 40 CFR 180.940(a) when the end-use concentration does not exceed 5 parts per million (ppm). Under the Federal Food, Drug, and Cosmetic Act (FFDCA), Innovative Reform Group, on behalf of The Clorox Company, submitted a petition to EPA requesting an exemption from the requirement of a tolerance. This regulation eliminates the need to establish a maximum permissible level for residues of various fragrance components, when used in accordance with the terms of those exemptions.
**DATES:**
This regulation is effective November 17, 2025. Objections and requests for hearings must be received on or before January 16, 2026 and must be filed in accordance with the instructions provided in 40 CFR part 178 (see also Unit I.C. of this document).
**ADDRESSES:**
The docket for this action, identified by docket identification (ID) number EPA-HQ-OPP-2021-0311, is available online at *https://www.regulations.gov.* Additional information about dockets generally, along with instructions for visiting the docket in-person, is available at *https://www.epa.gov/dockets.*
**FOR FURTHER INFORMATION CONTACT:**
Charles Smith, Registration Division (7505T), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; main telephone number: (202) 566-1030; email address: *[email protected].*
**SUPPLEMENTARY INFORMATION:**
**I. Executive Summary**
**A. Does this action apply to me?**
You may be potentially affected by this action if you are an agricultural producer, food manufacturer, or pesticide manufacturer. The following list of North American Industrial Classification System (NAICS) codes is not intended to be exhaustive, but rather provides a guide to help readers determine whether this document applies to them. Potentially affected entities may include:
• Crop production (NAICS code 111).
• Animal production (NAICS code 112).
• Food manufacturing (NAICS code 311).
• Pesticide manufacturing (NAICS code 32532).
If you have any questions regarding the applicability of this proposed action to a particular entity, consult the person listed under *FOR FURTHER INFORMATION CONTACT* .
**B. What is EPA's authority for taking this action?**
EPA is issuing this rulemaking under section 408 of the Federal Food, Drug, and Cosmetic Act (FFDCA), 21 U.S.C. 346a. FFDCA section 408(c)(2)(A)(i) allows EPA to establish an exemption from the requirement for a tolerance (the legal limit for a pesticide chemical residue in or on a food) only if EPA determines that the exemption is “safe.” FFDCA section 408(c)(2)(A)(ii) defines “safe” to mean that “there is a reasonable certainty that no harm will result from aggregate exposure to the pesticide chemical residue, including all anticipated dietary exposures and all other exposures for which there is reliable information.” This includes exposure through drinking water and in residential settings but does not include occupational exposure. Pursuant to FFDCA section 408(c)(2)(B), in establishing or maintaining in effect an exemption from the requirement of a tolerance, EPA must take into account the factors set forth in FFDCA section 408(b)(2)(C), which require EPA to give special consideration to exposure of infants and children to the pesticide chemical residue in establishing a tolerance and to “ensure that there is a reasonable certainty that no harm will result to infants and children from aggregate exposure to the pesticide chemical residue. . . .” Additionally, FFDCA section 408(b)(2)(D) requires that the Agency consider, among other things, “available information concerning the cumulative effects of a particular pesticide's residues” and “other substances that have a common mechanism of toxicity.”
**C. How can I file an objection or hearing request?**
Under FFDCA section 408(g), 21 U.S.C. 346a(g), any person may file an objection to any aspect of this regulation and may also request a hearing on those objections. If you fail to file an objection to the final rule within the time period specified in the final rule, you will have waived the right to raise any issues resolved in the final rule. You must file your objection or request a hearing on this regulation in accordance with the instructions provided in 40 CFR part 178. To ensure proper receipt by EPA, you must identify the docket ID number EPA-HQ-OPP-2021-0311 in the subject line on the first page of your submission. All objections and requests for a hearing must be in writing and must be received by the Hearing Clerk on or before January 16, 2026.
EPA's Office of Administrative Law Judges (OALJ), in which the Hearing Clerk is housed, urges parties to file and serve documents by electronic means only, notwithstanding any other particular requirements set forth in other procedural rules governing those proceedings. *See* “Revised Order Urging Electronic Filing and Service,” dated June 22, 2023, which can be found at *https://www.epa.gov/system/files/documents/2023-06/2023-06-22%20-%20revised%20order%20urging%20electronic%20filing%20and%20service.pdf.* Although EPA's regulations require submission via U.S. Mail or hand delivery, EPA intends to treat submissions filed via electronic means as properly filed submissions; therefore, EPA believes the preference for submission via electronic means will not be prejudicial. When submitting documents to the OALJ electronically, a person should utilize the OALJ e-filing system at *https://yosemite.epa.gov/oa/eab/eab-alj_upload.nsf.*
In addition to filing an objection or hearing request with the Hearing Clerk as described in 40 CFR part 178, please submit a copy of the filing (excluding any Confidential Business Information (CBI)) for inclusion in the public docket at *https://www.regulations.gov.* Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be CBI or other information whose disclosure is restricted by statute. If you wish to include CBI in your request, please follow the applicable instructions at *https://www.epa.gov/dockets/commenting-epa-dockets#rules* and clearly mark the information that you claim to be CBI. Information not marked confidential pursuant to 40 CFR part 2 may be disclosed publicly by EPA without prior notice.
**II. Petition for Exemption**
In the *Federal Register* of June 1, 2021 (86 FR 29229, FRL-10023-95), EPA issued a document pursuant to FFDCA section 408, 21 U.S.C. 346a, announcing the filing of a pesticide petition (PP IN-11402) by Innovative Reform Group, on behalf of The Clorox Company, 4900 Johnson Dr., Pleasanton, CA 94588. The petition requested that 40 CFR be amended by establishing an exemption from the requirement of a tolerance for residues of 2′-Acetonaphthone (CAS Reg. No. 93-08-3); Allyl phenoxyacetate (CAS Reg. No.7493-74-5); trans-Anethole (CAS Reg. No. 4180-23-8); Benzene, 1-(cyclopropylmethyl)-4-methoxy- (CAS Reg. No. 16510-27-3); Benzothiazole (CAS Reg. No. 95-16-9); 5,7-Dihydro-2-methylthieno(3,4-d)pyrimidine (CAS Reg. No. 36267-71-7); 1,3-Dioxolane-2-acetic acid, 2-methyl-, ethyl ester (CAS Reg. No. 6413-10-1); Diphenyl ether (CAS Reg. No. 101-84-8); Ethyl 2,4-dimethyldioxolane-2-acetate (CAS Reg. No. 6290-17-1); 5-Ethyl-3-hydroxy-4-methyl-2(5H)-furanone (CAS Reg. No. 698-10-2); Ethyl methylphenylglycidate (CAS Reg. No. 77-83-8); Ethyl 3-phenylglycidate (CAS Reg. No. 121-39-1); Ethyl (p-tolyloxy)acetate (CAS Reg. No. 67028-40-4); Fenner oil bitter (Foeniculum vulgare Miller) (CAS Reg. No. 8006-84-6); Isobutyl 3-(2-furan)propionate (CAS Reg. No. 105-01-1); Isoeugenyl benzyl ether (CAS Reg. No. 120-11-6); Isoeugenyl methyl ether (CAS Reg. No. 93-16-3); Isoquinoline (CAS Reg. No. 119-65-3); 1-Methoxy-4-propylbenzene (CAS Reg. No. 104-45-0); 4-Methyl-2-(1-phenylethyl)-1,3-dioxolane (CAS Reg. No. 67634-23-5); 4-(3,4-Methylenedioxyphenyl)-2-butanone (CAS Reg. No. 55418-52-5); 1-Methylnaphthalene (CAS Reg. No. 90-12-0); Naphtho{2,1-b}furan, dodecahydro-3a,6,6,9a-tetramethyl- (CAS Reg. No. 3738-00-9); β-Naphthyl ethyl ether (CAS Reg. No. 93-18-5); β-Naphthyl isobutyl ether (CAS Reg. No. 2173-57-1); β-Naphthyl methyl ether (CAS Reg. No. 93-04-9); Oil of anise (CAS Reg. No. 8007-70-3); Oils, star anise (CAS Reg. No. 68952-43-2); Phenoxy ethyl isobutyrate (CAS Reg. No. 103-60-6); 2-(3-Phenylpropyl)tetrahydrofuran (CAS Reg. No. 3208-40-0); Sclareolide (CAS Reg. No. 564-20-5); Tuberose oil (Polianthes tuberosa L.) (CAS Reg. No. 8024-05-3); when used as an inert ingredient (fragrance components) in antimicrobial formulations (food-contact surface sanitizing solutions) applied to food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils under 40 CFR 180.940(a) with end-use concentrations not to exceed 5 ppm. That document referenced a summary of the petition prepared by Innovative Reform Group on behalf of The Clorox Company, the petitioner, which is available in the docket. There were no comments received in response to the notice of filing.
**III. Inert Ingredient Definition**
Inert ingredients are all ingredients that are not active ingredients as defined in 40 CFR 153.125 and include, but are not limited to, the following types of ingredients (except when they have a pesticidal efficacy of their own): Solvents such as alcohols and hydrocarbons; surfactants such as polyoxyethylene polymers and fatty acids; carriers such as clay and diatomaceous earth; thickeners such as carrageenan and modified cellulose; wetting, spreading, and dispersing agents; propellants in aerosol dispensers; microencapsulating agents; and emulsifiers. The term “inert” is not intended to imply nontoxicity; the ingredient may or may not be chemically active. Generally, EPA has exempted inert ingredients from the requirement of a tolerance based on the low toxicity of the individual inert ingredients.
**IV. Final Tolerance Action**
**A. EPA's Safety Determination**
EPA establishes exemptions from the requirement of a tolerance only in those cases where it can be clearly demonstrated that the risks from aggregate exposure to pesticide chemical residues under reasonably foreseeable circumstances will pose no harm to human health. In order to determine the risks from aggregate exposure to pesticide inert ingredients, the Agency considers the toxicity of the inert in conjunction with possible exposure to residues of the inert ingredient through food, drinking water, and through other exposures that occur as a result of pesticide use in residential settings. If EPA is able to determine that a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will result from aggregate exposure to the inert ingredient, an exemption from the requirement of a tolerance may be established.
Consistent with FFDCA section 408(c)(2)(A), and the factors specified in FFDCA section 408(c)(2)(B), EPA has reviewed the available scientific data and other relevant information in support of this action. EPA has sufficient data to assess the hazards of and to make a determination on aggregate exposure for various fragrance components including exposure resulting from the exemption established by this action. EPA's assessment of exposures and risks associated with various fragrance components follows.
**B. Toxicological Profile**
EPA has evaluated the available toxicity data and considered their validity, completeness, and reliability as well as the relationship of the results of the studies to human risk. EPA has also considered available information concerning the variability of the sensitivities of major identifiable subgroups of consumers, including infants and children. Specific information on the studies received and the nature of the adverse effects caused by the chemicals listed in Unit II as well as the no-observed-adverse-effect-level (NOAEL) and the lowest-observed-adverse-effect-level (LOAEL) from the toxicity studies are discussed in this unit.
The Agency assessed these fragrance components via the Threshold of Toxicological Concern (TTC) approach as outlined by the European Food Safety Authority (EFSA) in their 2019 guidance document on the use of TTC in food safety assessment. Information regarding the database of studies and chemicals used to derive TTCs are reviewed therein. The TTC approach has been used by the Joint Expert Committee on Food Additives of the United Nations' (U.N.) Food and Agriculture Organization and the World Health Organization (JECFA), the former Scientific Committee on Food of the European Commission, the European Medicines Agency, and EFSA.
Information from JECFA reports as well as predictive toxicology using the Organisation for Economic Co-operation and Development (OECD) Quantitative Structure-Activity Relationships (QSAR) Toolbox was used to confirm that the fragrances listed in Unit II have low carcinogenic potential and are thus good candidates for the application of the TTC method. Although 3 chemicals had in silico carcinogenicity alerts, JECFA and EFSA concluded and EPA concurs that all fragrances listed in Unit II have low carcinogenic potential, based on in vitro and/or in vivo genotoxicity studies available on the chemical or structurally related chemicals. Therefore, the TTC method can be applied to these fragrances.
TTCs are derived from a conservative and rigorous approach to establish generic threshold values for human exposure at which a very low probability of adverse effects is likely. By comparing a range of compounds by Cramer Class (classes I, II, and III which correspond to the probability of low, moderate, and high toxicity) and NOEL (no-observed-effect-level), fifth percentile NOELs were established for each Cramer Class as “Human Exposure Thresholds”. These values were 3, 0.91 and 0.15 mg/kg/day for classes I, II, and III, respectively.
**C. Toxicological Points of Departure/Levels of Concern**
Once a pesticide's toxicological profile is determined, EPA identifies toxicological points of departure (POD) and levels of concern to use in evaluating the risk posed by human exposure to the pesticide. For hazards that have a threshold below which there is no appreciable risk, the toxicological POD is used as the basis for derivation of reference values for risk assessment. PODs are developed based on a careful analysis of the doses in each toxicological study to determine the dose at which no adverse effects are observed (the NOAEL) and the lowest dose at which adverse effects of concern are identified (the LOAEL). Uncertainty/safety factors are used in conjunction with the POD to calculate a safe exposure level (generally referred to as a population-adjusted dose (PAD) or a reference dose (RfD)) and a safe margin of exposure (MOE). For non-threshold risks, the Agency assumes that any amount of exposure will lead to some degree of risk. Thus, the Agency estimates risk in terms of the probability of an occurrence of the adverse effect expected in a lifetime. For more information on the general principles EPA uses in risk characterization and a complete description of the risk assessment process, see *https://www.epa.gov/pesticide-science-and-assessing-pesticide-risks/overview-risk-assessment-pesticide-program.*
The human exposure threshold value for threshold ( *i.e.,* non-cancer) risks is based upon Cramer structural class. All of the fragrance components listed in Unit II are in Cramer Class III, which is defined as chemicals of simple structure and efficient modes of metabolism, suggesting low oral toxicity. Fragrance components identified with more than one Cramer Class will default to the more conservative (higher) Cramer Class *i.e.* fragrance component identified with a Cramer Class II and III will default to Cramer Class III. Therefore, the NOEL of 0.15 mg/kg/day is selected as the point of departure for all exposure scenarios assessed (chronic dietary, incidental oral, dermal and inhalation exposures).
**D. Exposure Assessment**
1. *Dietary exposure from food and feed uses.* In evaluating dietary exposure to each of the fragrance components listed in Unit II ( *e.g.* ingesting foods that come in contact with surfaces treated with pesticide formulations containing these fragrance components, and drinking water exposures), EPA considered exposure under the proposed exemption at a concentration not to exceed 5 ppm for each of the listed fragrance components as well any other sources of dietary exposure. EPA assessed dietary exposures from the fragrance components listed in Unit II in food as follows:
The dietary assessment for food contact sanitizer solutions calculated the Daily Dietary Dose and the Estimated Daily Intake. The assessment considered application rates, residual solution or quantity of solution remaining on the treated surface without rinsing with potable water, surface area of the treated surface which comes into contact with food, pesticide migration fraction, and body weight. These assumptions are based on U.S. Food and Drug Administration guidelines.
2. *From non-dietary exposure.* The term “residential exposure” is used in this document to refer to non-occupational, non-dietary exposure ( *e.g.,* textiles (clothing and diapers), carpets, swimming pools, and hard surface disinfection on walls, floors, tables).
The fragrance components listed in Unit II may be used as inert ingredients in products that are registered for specific uses that may result in residential exposure, such as pesticides used in and around the home. The Agency conducted a conservative assessment of potential residential exposure by assessing various fragrance components in disinfectant-type uses (indoor scenarios). The Agency's assessment of adult residential exposure combines high-end dermal and inhalation handler exposure from indoor hard surface, wiping, and aerosol spray uses. The Agency's assessment of children's residential exposure includes total post-application exposures associated with contact with treated indoor surfaces (dermal and hand-to-mouth exposures).
3. *Cumulative effects from substances with a common mechanism of toxicity.* Section 408(b)(2)(D)(v) of FFDCA requires that, when considering whether to establish, modify, or revoke a tolerance, the Agency consider “available information” concerning the cumulative effects of a particular pesticide's residues and “other substances that have a common mechanism of toxicity.”
Based on the lack of toxicity in the available database, EPA has not found these various fragrance components to share a common mechanism of toxicity with any other substances, and these various fragrance components do not appear to produce a toxic metabolite produced by other substances. For the purposes of this tolerance exemption, therefore, EPA has assumed that these various fragrance components do not have a common mechanism of toxicity with other substances. For information regarding EPA's efforts to determine which chemicals have a common mechanism of toxicity and to evaluate the cumulative effects of such chemicals, see EPA's website at *https://www.epa.gov/pesticide-science-and-assessing-pesticide-risks/cumulative-assessment-risk-pesticides.*
**E. Additional Safety Factor for the Protection of Infants and Children**
Section 408(b)(2)(C) of FFDCA provides that EPA shall apply an additional tenfold (10X) margin of safety for infants and children in the case of threshold effects to account for prenatal and postnatal toxicity and the completeness of the database on toxicity and exposure unless EPA determines based on reliable data that a different margin of safety will be safe for infants and children. This additional margin of safety is commonly referred to as the FQPA Safety Factor (SF). In applying this provision, EPA either retains the default value of 10X, or uses a different additional safety factor when reliable data available to EPA support the choice of a different factor.
The FQPA SF has been reduced to 1X in this risk assessment because clear NOELs and LOELs were established in the studies used to derive the endpoints (which included developmental and reproductive toxicity studies), maternal and developmental-specific 5th percentile NOELs indicate low potential for offspring susceptibility, and the conservative assumptions made in the exposure assessment are unlikely to underestimate risk.
**F. Aggregate Risks and Determination of Safety**
EPA determines whether acute and chronic dietary pesticide exposures are safe by comparing aggregate exposure estimates to the acute PAD (aPAD) and chronic PAD (cPAD). For linear cancer risks, EPA calculates the lifetime probability of acquiring cancer given the estimated aggregate exposure. Short-, intermediate-, and chronic-term risks are evaluated by comparing the estimated aggregate food, water, and residential exposure to the appropriate PODs to ensure that an adequate MOE exists.
1. *Acute aggregate risk.* An acute aggregate risk assessment takes into account acute exposure estimates from dietary consumption of food and drinking water. No adverse effects resulting from a single oral exposure were identified and no acute dietary endpoint was selected for any of the fragrance components listed in Unit II. Therefore, these fragrance components are not expected to pose an acute risk.
2. *Short-term aggregate risk.* Short-term aggregate exposure takes into account short-term residential exposure plus chronic exposure to food and water (considered to be a background exposure level). For residential handler short-term exposure scenarios, MOEs ranged from 14,000 to 250,000, while for residential post-application exposure scenarios, MOEs ranged from 17,000 to 35,000. These MOEs are greater than the level of concern (LOC) of 100 and therefore are not of concern. The short-term aggregate MOE is 8,300 for adults and 10,700 for children, which are greater than the LOC of 100 and therefore are not of concern.
3. *Intermediate-term aggregate risk.* Intermediate-term aggregate exposure takes into account intermediate-term residential (dermal and inhalation) exposure plus chronic dietary exposure (food and drinking water). As the same endpoints were selected for short-term and intermediate-term exposures, intermediate-term aggregate risk is equal to the short-term aggregate risk, and it is not of concern.
4. *Chronic aggregate risk.* Using the exposure assumptions described in this unit for chronic exposure, EPA has concluded that chronic exposure to the fragrance components listed in Unit II from food and water will utilize 0.20% of the cPAD for the U.S. population and 0.34% of the cPAD for children 1 to 2 years old, the population group receiving the greatest exposure. Chronic residential exposure to residues of these fragrance components is not expected. Therefore, the chronic aggregate risk is equal to the chronic dietary exposure for children 1 to 2 years old (0.34% of the cPAD).
5. *Aggregate cancer risk for U.S. population.* There is low concern for genotoxicity/carcinogenicity in humans for the fragrance components listed in Unit II of this document. Therefore, the assessment under the TTC value for non-cancer risks is protective for all risks, including carcinogenicity.
6. *Determination of safety.* Based on these risk assessments, EPA concludes that there is a reasonable certainty that no harm will result to the general population, or to infants and children, from aggregate exposure to residues of the fragrance components listed in Unit II.
**G. Analytical Enforcement Methodology**
An analytical method is not required for enforcement purposes since the Agency is not establishing a numerical tolerance for residues of the fragrance components listed in Unit II of this document in or on any food commodities. EPA is, however, establishing limitations on the amount of these fragrance components that may be used in antimicrobial pesticide formulations. These limitations will be enforced through the pesticide registration process under the Federal Insecticide, Fungicide, and Rodenticide Act (“FIFRA”), 7 U.S.C. 136 *et seq.* EPA will not register any pesticide formulation for food use that contains these fragrance components in excess of 5 ppm in the final pesticide formulation.
**H. Conclusions**
Therefore, an exemption from the requirement of a tolerance is established for residues of various fragrance components listed in Unit II of this document when used as an inert ingredient (fragrance component) in antimicrobial formulations applied to food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils with an end-use concentration not to exceed 5 ppm under 40 CFR 180.940(a).
In addition to the substantive changes described in this document, EPA is also taking the opportunity to make one-time, non-substantive changes to correct alphabetization, capitalization, and formatting inconsistencies in Table 1 to Paragraph (a) of 40 CFR 180.940.
**V. Statutory and Executive Order Reviews**
Additional information about these statutes and Executive Orders can be found at *https://www.epa.gov/regulations/and-executive-orders.*
**A. Executive Order 12866: Regulatory Planning and Review**
This action is exempt from review under Executive Order 12866 (58 FR 51735, October 4, 1993), because it establishes or modifies a pesticide tolerance or a tolerance exemption under FFDCA section 408 in response to a petition submitted to the Agency. The Office of Management and Budget (OMB) has exempted these types of actions from review under Executive Order 12866.
**B. Executive Order 14192: Unleashing Prosperity Through Deregulation**
Executive Order 14192 (90 FR 9065, February 6, 2025) does not apply because actions that establish a tolerance under FFDCA section 408 are exempted from review under Executive Order 12866.
**C. Paperwork Reduction Act (PRA)**
This action does not impose an information collection burden under the PRA 44 U.S.C. 3501 *et seq.,* because it does not contain any information collection activities.
**D. Regulatory Flexibility Act (RFA)**
This action is not subject to the RFA, 5 U.S.C. 601 *et seq.* The RFA applies only to rules subject to notice and comment rulemaking requirements under the Administrative Procedure Act (APA), 5 U.S.C. 553, or any other statute. This rule is not subject to the APA but is subject to FFDCA section 408(d), which does not require notice and comment rulemaking to take this action in response to a petition.
**E. Unfunded Mandates Reform Act (UMRA)**
This action does not contain an unfunded mandate of $100 million or more (in 1995 dollars and adjusted annually for inflation) as described in UMRA, 2 U.S.C. 1531-1538, and does not significantly or uniquely affect small governments. The action imposes no enforceable duty on any state, local or tribal governments or the private sector.
**F. Executive Order 13132: Federalism**
This action does not have federalism implications as specified in Executive Order 13132 (64 FR 43255, August 10, 1999), because it will not have substantial direct effects on the states, on the relationship between the national government and the states, or on the distribution of power and responsibilities among the various levels of government.
**G. Executive Order 13175: Consultation and Coordination With Indian Tribal Governments**
This action does not have tribal implications as specified in Executive Order 13175 (65 FR 67249, November 9, 2000), because it will not have substantial direct effects on tribal governments, on the relationship between the Federal government and the Indian tribes, or on the distribution of power and responsibilities between the Federal government and Indian tribes.
**H. Executive Order 13045: Protection of Children From Environmental Health Risks and Safety Risks**
This action is not subject to Executive Order 13045 (62 FR 19885, April 23, 1997) because it is not a significant regulatory action under section 3(f)(1) of Executive Order 12866, and because EPA does not believe the environmental health or safety risks addressed by this action present a disproportionate risk to children. However, EPA's 2021 *Policy on Children's Health* applies to this action.
This rule finalizes tolerance actions under the FFDCA, which requires EPA to give special consideration to exposure of infants and children to the pesticide chemical residue in establishing a tolerance and to “ensure that there is a reasonable certainty that no harm will result to infants and children from aggregate exposure to the pesticide chemical residue . . .” (FFDCA 408(b)(2)(C)). The Agency's consideration is documented in the pesticide-specific registration review documents, located in the applicable docket at *https://www.regulations.gov.*
**I. Executive Order 13211: Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution or Use**
This action is not subject to Executive Order 13211 (66 FR 28355) (May 22, 2001) because it is not a significant regulatory action under Executive Order 12866.
**J. National Technology Transfer Advancement Act (NTTAA)**
This action does not involve technical standards that would require Agency consideration under NTTAA section 12(d), 15 U.S.C. 272.
**K. Congressional Review Act (CRA)**
This action is subject to the CRA, 5 U.S.C. 801 *et seq.,* and EPA will submit a rule report to each House of the Congress and to the Comptroller General of the United States. This action does not meet the criteria set forth in 5 U.S.C. 804(2).
**List of Subjects in 40 CFR Part 180**
Environmental protection, Administrative practice and procedure, Agricultural commodities, Pesticides and pests, Reporting and recordkeeping requirements.
Dated: November 3, 2025.
Charles Smith,
Director, Registration Division, Office of Pesticide Programs.
For the reasons stated in the preamble, the EPA amends 40 CFR chapter I as follows:
**PART 180—TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD**
**40 CFR Part 180**
1. The authority citation for part 180 continues to read as follows:
**Authority:**
21 U.S.C. 321(q), 346a and 371.
**40 CFR Part 180**
2. Section 180.940 is amended by revising and republishing table 1 to paragraph (a) to read as follows:
§ 180.940
(a) * * *
| Pesticide chemical | CAS Reg. No. | Limits |
| --- | --- | --- |
| Acetal | 105-57-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Acetaldehyde ethyl cis-3-hexenyl acetal | 28069-74-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Acetanisole | 100-06-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Acetic acid | 64-19-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Acetic acid, octyl ester | 112-14-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Acetoin | 513-86-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2′-Acetonaphthone | 93-08-3 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Acetophenone | 98-86-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-Acetyl-6-t-butyl-1,1-dimethylindan | 13171-00-1 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Adipic acid | 124-04-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Alcohols, C
, distn. residues | 68603-17-8; 1190630-03-5 | None. |
| Alkenes, C
, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C
alcs. manuf | 1430895-61-6 | None. |
| Alkenes, C
, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C
alcs. manuf | 1430895-62-7 | None. |
| Alkylbenzene sulfonates (branched and linear) of chain lengths C
-C
, including benzenesulfonic acid, dodecyl and benzenesulfonic acid, dodecyl-, sodium salt | 27176-87-0; 25155-30-0 | When ready for use, the end-use concentration is not to exceed 700 ppm. |
| Alkyl cylcohexylpropionate | 2705-87-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons | 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5 | None. |
| C
-C
-Alkyl dimethyl amine oxides | 1643-20-5, 2571-88-2, 2605-79-0, 3332-27-2, 61788-90-7, 68955-55-5, 70592-80-2, 7128-91-8, 85408-48-6, and 85408-49-7 | When ready for use, the end-use concentration is not to exceed 1,350 ppm. |
| Allspice oil (
Lindl.) | 8006-77-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Allyl α-ionone | 79-78-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Allyl cinnamate | 1866-31-5 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Allyl heptanoate | 142-19-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Allyl hexanoate | 123-68-2 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Allyl phenoxyacetate | 7493-74-5 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Allyl propionate | 2408-20-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Aluminum sulfate | 10043-01-3 | When ready for use, the end-use concentration is not to exceed 50 ppm. |
| Ammonium chloride | 12125-02-9 | When ready for use, the end-use concentration is not to exceed 48 ppm. |
| Amyl butyrate | 540-18-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Amyl formate | 638-49-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Amyl hexanoate | 540-07-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Amylopectin, acid-hydrolyzed, 1-oxtenylbutanedioate | 113894-85-2 | None. |
| Amylopectin, hydrogen 1-octadecenylbutanedioate | 125109-81-1 | None. |
| trans-Anethole | 4180-23-8 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| p-Anisyl acetate | 104-21-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Anisyl formate | 122-91-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Anisyl propionate | 7549-33-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Aspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt | 144538-83-0 | When ready for use, the end-use concentration is not to exceed 5000 ppm. |
| Balsam oil, Peru (
Klotzsch) | 8007-00-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzaldehyde | 100-52-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzaldehyde, methyl- | 1334-78-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzene, 1-(cyclopropylmethyl)-4-methoxy- | 16510-27-3 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Benzene, 1,2-dimethoxy- | 91-16-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzene, 2-methoxy-4-methyl-1-(1-methylethyl)- | 1076-56-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzeneacetaldehyde | 122-78-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1,3-Benzodioxole-5-carboxaldehyde | 120-57-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Benzoic acid | 65-85-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzoin gum, Sumatra | 9000-05-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl acetate | 140-11-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl alcohol | 100-51-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl benzoate | 120-51-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl butyrate | 103-37-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl cinnamate | 103-41-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl formate | 104-57-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl isobutyrate | 103-28-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl propionate | 122-63-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl salicylate | 118-58-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzyl trans-2-methyl-2-butenoate | 37526-88-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzaldehyde, 4-methoxy- | 123-11-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzenemethanol, alpha-methyl-, 1-acetate | 93-92-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzoic acid, ethyl ester | 93-89-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Benzothiazole | 95-16-9 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Bicyclo(2.2.1)heptan-2-ol, 1,3,3-trimethyl- | 1632-73-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Bicyclo(2.2.1)heptan-2-ol, 1,7,7-trimethyl-,propanoate, exo- | 2756-56-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Bicyclo[2.2.1]heptan-2-one, 1,7,7-trimethyl-, (1R, 4R)- | 464-49-3 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Bicyclo[3.1.1]heptane, 6,6-dimethyl-2-methylene- | 127-91-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Bisabolene | 495-62-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione | 123944-63-8 | Dye, coloring agent 0.5% by weight. |
| Bois de rose oil | 8015-77-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Borneol | 507-70-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| endo-Bornyl acetate | 76-49-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| laevo-Bornyl acetate | 5655-61-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butanoic acid, 1,1-dimethyl-2-phenylethyl ester | 10094-34-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butanoic acid, 3-methyl-, 2-methylpropyl ester | 589-59-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butanoic acid, 3-oxo-, ethyl ester | 141-97-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Buten-1-one, 1-(2,6,6-trimethyl-1,3-cyclohexadien-1-yl)- | 23696-85-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Buten-2-one, 3-methyl-4-(2,6,6-trimethyl-2-cyclohexen-1-yl)- | 127-51-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Buten-2-one, 4-(2,6,6-trimethyl-1-cyclohexen-1-yl)- | 14901-07-6; 79-77-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butryic acid | 107-92-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butyl acetate | 123-86-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butyl alcohol | 71-36-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butyl butyrate | 109-21-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butyl butyryllactate | 7492-70-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butyl isovalerate | 109-19-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butyl sulfide | 544-40-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Butyl 10-undecenoate | 109-42-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| n-Butyl benzoate | 136-60-7 | When ready for use, the end-use concentration is not to exceed 15,000 ppm. |
| n-Butyl 2-methylbutyrate | 15706-73-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| n-Butyl-3-hydroxybutyrate | 53605-94-0 | Solvent. |
| α-Butylcinnamaldehyde | 7492-44-6 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-sec-Butylcyclohexanone | 14765-30-1 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| γ-Butyrolactone | 96-48-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cadinene | 29350-73-0; 523-47-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cajeput oil (Melaleuca leucadendron L.) | 8008-98-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Calcium bisulfate | None | When ready for use, the end-use concentration is not to exceed 2,000 ppm. |
| Calcium sulfate | 7778-18-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Camphene | 79-92-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Camphor | 21368-68-3 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Cananga oil | 68606-83-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Capric (decanoic) acid | 334-48-5 | None. |
| Caprylic (octanoic) acid | 124-07-2 | None. |
| Cardamom (Elettaria cardamomum (L.) Maton) | 85940-32-5 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Cardamom seed oil (Elettaria cardamomum (L.) Maton) | 8000-66-6 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| δ-3-Carene | 13466-78-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Carvacrol | 499-75-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-Carvomenthenol | 562-74-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Carvyl acetate | 97-42-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| β-Caryophyllene | 87-44-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cassia bark oil | 8007-80-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Celery seed oil | 8015-90-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Chamomile flower, Roman, oil (Anthemis nobilis L.) | 8015-92-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamic acid; trans-Cinnamic acid | 621-82-9; 140-10-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamic aldehyde | 104-55-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamic alcohol | 104-54-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamon leaf oil | 84649-98-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamyl acetate | 103-54-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamyl benzoate | 5320-75-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamyl cinnamate | 122-69-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamyl formate | 104-65-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamyl isobutyrate | 103-59-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cinnamyl propionate | 103-56-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citral | 5392-40-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citral dimethyl acetal | 7549-37-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellal | 106-23-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellol | 106-22-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronelloxyacetaldehyde | 7492-67-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellyl acetate | 150-84-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellyl butyrate | 141-16-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellyl formate | 105-85-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellyl isobutyrate | 97-89-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellyl propionate | 141-14-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citronellyl tiglate | 24717-85-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Citrus, ext | 94266-47-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Clary oil (Salvia sclarea L.) | 8016-63-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cloves (
spp.) | 84961-50-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cognac oil, green | 8016-21-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Copper sulfate pentahydrate | 7758-99-8 | When ready for use, the end-use concentration is not to exceed 80 ppm. |
| Coriander oil (Coriandrum sativum L.) | 8008-52-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cornmint oil | 68917-18-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cuminaldehyde | 122-03-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Currant buds black absolute (
L.) | 68606-81-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cyclohexadiene, methyl- | 30640-46-1; 1888-90-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cyclohexene, 1-methyl-4-(1-methylethylidene)- | 586-62-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Cyclohexylethanol | 1193-81-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Cyclohexylethyl acetate | 21722-83-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Cyclopentaneacetai acid, 3-oxo-2-pentyl-, methyl ester | 24851-98-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Cyclopropanemethanol, 1-methyl-2-[(1,2,2-trimethylbicyclo[3.1.0]hex-3-yl)methyl]- | 198404-98-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| p-Cymene | 99-87-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| β-Damascone, (Z)- | 23726-92-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| δ-Decalactone | 705-86-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Decalactone | 706-14-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| ε-Decalactone | 5579-78-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Decanal | 112-31-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Decanoic acid, 4-hydroxy-4-methyl-γ-lactone | 7011-83-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Decanol | 112-30-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Decenal | 3913-71-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| (E)-4-Decenal | 65405-70-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-Decenal | 30390-50-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 9-Decenal | 39770-05-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Decyl acetate | 112-17-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1,3-Dibromo-5,5-dimethylhydantoin | 77-48-5 | None. |
| 1,1-Diethoxy-3,7-dimethylocta-2,6-diene | 7492-66-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Diethyl malonate | 105-53-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Diethyl sebacate | 110-40-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Diethyl tartrate | 87-91-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Dihydro-beta-ionone | 17283-81-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Dihydrocarvyl acetate | 20777-49-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 5,7-Dihydro-2-methylthieno(3,4-d)pyrimidine | 36267-71-7 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Diisobutyl ketone | 108-83-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| m-Dimethoxybenzene | 151-10-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Dimethoxybenzene | 150-78-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,6-Dimethoxyphenol | 91-10-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3,4-Dimethyl-1,2-cyclopentadione | 13494-06-9 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 3,7-Dimethyl-1-octanol | 106-21-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,2-Dimethyl-1,3-dioxolane-4-methanol | 100-79-8 | None. |
| 2,6-Dimethyl-4-heptanol | 108-82-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,6-Dimethyl-5-heptanal | 106-72-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3,7-Dimethyl-1,3,6-octatriene | 13877-91-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3,7-Dimethyl-6-octenoic acid | 502-47-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Dimethylbenzylcarbinyl acetate | 151-05-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Dimethylcyclohex-3-ene-1-carbaldehyde | 27939-60-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α,α-Dimethylphenethyl alcohol | 100-86-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,5-Dimethylpyrazine | 123-32-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2,6-Dimethylpyrazine | 108-50-9 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| p,α-Dimethylstyrene | 1195-32-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 6,10-Dimethylundeca-5,9-dien-2-one | 689-67-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Di-n-butyl carbonate | 542-52-9 | When ready for use, the end-use concentration is not to exceed 15,000 ppm. |
| 1,3-Dioxolane-2-acetic acid, 2-methyl-, ethyl ester | 6413-10-1 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Diphenyl ether | 101-84-8 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Dipropylene glycol | 25265-71-8 | None. |
| 1-Docosanol | 661-19-8 | None. |
| γ-Dodecalactone | 2305-05-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| δ-Dodecalactone | 713-95-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Dodecanol, (2E)- | 20407-84-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Dodecenal | 4826-62-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1Eicosanol | 629-96-9 | None. |
| Ethanol | 64-17-5 | None. |
| Elemi oil (Canarium spp.) | 8023-89-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl acetate | 141-78-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl amyl ketone | 106-68-3 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Ethyl anthranilate | 87-25-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-Ethylbenzaldehyde | 4748-78-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl benzoylacetate | 94-02-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl butyrate | 105-54-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl cinnamate | 103-36-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl (2E,4Z)-2,4-decadienoate | 3025-30-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl decanoate | 110-38-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl 2,4-dimethyldioxolane-2-acetate | 6290-17-1 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Ethyl formate | 109-94-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl heptanoate | 106-30-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl hexanoate | 123-66-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl 2-hexylacetoacetate | 29214-60-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl 3-hydroxybutyrate | 5405-41-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 5-Ethyl-3-hydroxy-4-methyl-2(5H)-furanone | 698-10-2 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Ethyl isobutyrate | 97-62-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl isovalerate | 108-64-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl laurate | 106-33-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl levulinate | 539-88-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl maltol | 4940-11-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Ethyl 2-methyl-3-pentenoate | 1617-23-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl methylphenylglycidate | 77-83-8 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Ethyl 2-methylbutyrate | 452-79-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl 2-methylpentanoate | 39255-32-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Ethyl-3-methylpyrazine | 15707-23-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Ethyl nonanoate | 123-29-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl octanoate | 106-32-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl 3-phenylglycidate | 121-39-1 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Ethyl propionate | 105-37-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl (p-tolyloxy)acetate | 67028-40-4 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| ethyl salicylate | 118-61-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl tiglate | 5837-78-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethylene brassylate | 105-95-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt | 64-02-8 | None. |
| 4-Ethylguaiacol | 2785-89-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Ethylphenol | 123-07-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl phenylacetate | 101-97-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethyl 3-phenylpropionate | 2021-28-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ethylvanillin | 121-32-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Eucalyptus oil | 8000-48-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Eugenyl acetate | 93-28-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| FD&C Green No. 3 | 2353-45-9 | None. |
| FD&C Red No. 40 | 25956-17-6 | When ready for use, the end-use concentration is not to exceed 20 ppm. |
| FD&C Yellow No. 5 | 1934-21-0 | When ready for use, the end-use concentration is not to exceed 1000 ppm. |
| α-Farnesene | 125037-13-0; 502-61-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Farnesol | 4602-84-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Farnesyl acetate | 29548-30-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Fenchone | 4695-62-9 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Fenner oil bitter (Foeniculum vulgare Miller) | 8006-84-6 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| 2-Formyl-6,6-dimethylbicyclo(3.1.1)hept-2-ene | 564-94-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Galbanum oil (Ferula spp.) | 8023-91-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranic acid | 459-80-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geraniol | 106-24-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| (E)-Geraniol | 106-24-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| (E)-Geraniol acetate | 105-87-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranyl benzoate | 94-48-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranyl butyrate | 106-29-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranyl formate | 105-86-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranyl isobutyrate | 2345-26-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranyl phenylacetate | 102-22-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranyl propionate | 105-90-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Geranyl tiglate | 7785-33-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| C
-C
linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster | 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 | When ready for use, the end-use concentration is not to exceed 500 ppm. |
| D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, | None | None. |
| D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, | None | None. |
| D-Glucopyranose, oligomeric, decyl octyl glycosides | 68515-73-1 | None. |
| D-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum) | 595585-15-2 | None. |
| Glyceryl triacetate | 102-76-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Guaiacol | 90-05-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Guaiene | 88-84-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Helichrysum leaf oil (Helichrysum angustifolium) | 8023-95-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Heptalactone | 105-21-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Heptanal | 111-71-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Heptanal, 2-(phenlymethylene)- | 122-40-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Heptanoic acid | 111-14-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Heptanol | 543-49-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Heptanone | 106-35-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-Hepten-4-one, 5-methyl- | 81925-81-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| trans-3-Heptenyl 2-methylpropanoate | 67801-45-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Heptyl acetate | 112-06-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Heptyl alcohol | 111-70-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Hexalactone | 695-06-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexanal | 66-25-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,3-Hexanedione | 3848-24-6 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Hexanoic acid | 142-62-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| n-Hexanol | 111-27-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexadecanoic acid | 57-10-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexadecanoic acid, ethyl ester | 628-97-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| ω-6-Hexadecenlactone | 7779-50-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,4-Hexadienyl isobutyrate | 16491-24-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Hexanol, 2-ethyl- | 104-76-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 1-Hexanol, 3,5,5-trimethyl- | 3452-97-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Hexenal, (2E)- | 6728-26-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Hexen-1-ol | 2305-21-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Hexen-1-ol, (3Z)- | 928-96-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| (E)-2-Hexen-1-yl acetate | 2497-18-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| (Z)-3-Hexenol | 928-96-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| (Z)-3-Hexenol acetate | 3681-71-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-3-Hexenyl benzoate | 25152-85-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-3-Hexenyl butyrate | 16491-36-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 5-(cis-3-Hexenyl)dihydro-5-methyl-2(3H)furanone | 70851-61-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-3-Hexenyl hexanoate | 31501-11-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-3-Hexenyl isobutyrate | 41519-23-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Hexenyl 2-methylbutanoate | 10094-41-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-3-Hexenyl propionate | 33467-74-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-3-Hexenyl tiglate | 67883-79-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Hexenyl formate | 9/5/2315 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl acetate | 142-92-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl benzoate | 6789-88-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl butyrate | 2639-63-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl hexanoate | 6378-65-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl isobutyrate | 2349-07-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl 2-methylbutanoate | 10032-15-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl octanoate | 1117-55-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hexyl propionate | 2445-76-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Hexylcinnamaldehyde | 101-86-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Hydrogen peroxide | 7722-84-1 | When ready for use, the end-use concentration is not to exceed 91 ppm. |
| 4-Hydroxy-2,5-dimethyl-3(2H)-furanone | 3658-77-3 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Hydroxycitronellal | 107-75-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hydroxycitronellal dimethyl acetal | 141-92-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hydroxycitronellol | 107-74-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1,4-Bis[[3-[2-(2-Hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione | 123944-63-8 | When ready for use, the end-use concentration is not to exceed 300 ppm. |
| Hydroxynonanoic acid, δ-lactone | 3301-94-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-(p-Hydroxyphenyl)-2-butanone | 5471-51-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 5-Hydroxyundecanoic acid lactone | 710-04-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Hypochlorous acid | 7790-92-3 | When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine. |
| Hypochlorous acid, sodium salt | 7681-52-9 | When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine. |
| Hyssop oil (Hyssopus officinalis L.) | 8006-83-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1H-Indole | 120-72-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Iodine | 7553-56-2 | When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine. |
| α-Ionone | 127-41-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Ionone | 79-76-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Irone | 79-69-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl acetate | 123-92-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl alcohol | 123-51-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl benzoate | 94-46-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl 3-(2-furan)propionate | 105-01-1 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Isoamyl butyrate | 106-27-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl cinnamate | 7779-65-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl isovalerate | 659-70-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl phenylacetate | 102-19-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl propionate | 105-68-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoamyl salicylate | 87-20-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoborneol | 124-76-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobornyl acetate | 125-12-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl acetate | 110-19-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl angelate | 7779-81-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl benzoate | 120-50-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl 2-butenoate | 589-66-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl butyrate | 539-90-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl cinnamate | 122-67-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl isobutyrate | 97-85-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl 3-(2-furan)propionate | 105-01-1 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| 2-Isobutyl-3-methoxypyrazine | 24683-00-9 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-Isobutyl-2-methyl-1,3-dioxolane-4-methanol | 5660-53-7 | None. |
| Isobutyl phenylacetate | 102-13-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyl salicylate | 87-19-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Isobutylphenethyl alcohol | 7779-78-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Isobutyraldehyde | 78-84-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isobutyric acid | 79-31-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoeugenol | 97-54-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoeugenyl acetate | 93-29-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoeugenyl benzyl ether | 120-11-6 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Isoeugenyl methyl ether | 93-16-3 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Isojasmone | 11050-62-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| d,l-Isomenthone | 491-07-6 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| iso-Methyl-β-ionone | 79-89-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isopropyl acetate | 108-21-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Isopropylacetophenone | 645-13-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Isopropylbenzyl alcohol | 536-60-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isopropyl-3-hydroxybutyrate | 54074-94-1 | Solvent. |
| Isopropyl 2-methylbutyrate | 66576-71-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Isopropyl-4-methylthiazole | 15679-13-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-Isopropylphenol | 88-69-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Isopropyl phenylacetaldehyde | 4395-92-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isopulegol | 89-79-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Isoquinoline | 119-65-3 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Isovaleric acid | 503-74-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Jasmine lactone | 25524-95-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Jasmine oil (
L.) | 8022-96-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Juniper oil (
L.) | 8002-68-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Labdanum oil (Cistus spp.) | 8016-26-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Lactic acid (including l-lactic acid) | 50-21-5, 79-33-4 | When ready for use, the end-use concentration is not to exceed 10,000 ppm in antimicrobial formulations applied to food-contact surfaces in public eating places. |
| Lauryl acetate | 112-66-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Lauric acid | 143-07-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Lauric aldehyde | 112-54-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Lauryl alcohol | 112-53-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Lavandin oil (
) | 8022-15-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Levulinic acid | 123-76-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| d-Limonene | 5989-27-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalool | 78-70-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalool acetate | 115-95-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalool oxide | 60047-17-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| (E)-Linalool oxide | 34995-77-2 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| (Z)-Linalool oxide | 5989-33-3 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Linalyl acetate | 115-95-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalyl benzoate | 126-64-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalyl cinnamate | 78-37-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalyl formate | 115-99-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalyl hexanoate | 7779-23-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalyl isobutyrate | 78-35-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalyl isovalerate | 1118-27-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linalyl propionate | 144-39-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Linoleic acid, methyl ester | 112-63-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Lipase, triacylglycerol | 9001-62-1 | When ready for use, the end-use concentration is not to exceed 500 ppm. |
| Lovage oil (Levisticum officinale Koch) | 8016-31-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Mace oil (Myristica fragrans Houtt.) | 8007-12-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Magnesium oxide | 1309-48-4 | None. |
| Magnesium sulfate anhydrous | 7487-88-9 | When ready for use, the end-use concentration is not to exceed 4400 ppm. |
| Magnesium sulfate heptahydrate | 10034-99-8 | When ready for use, the end-use concentration is not to exceed 4400 ppm. |
| Magnesium sulfate hexahydrate | 7830-18-1 | When ready for use, the end-use concentration is not to exceed 4400 ppm. |
| Magnesium sulfate monohydrate | 14168-73-1 | When ready for use, the end-use concentration is not to exceed 4400 ppm. |
| Magnesium sulfate pentahydrate | 5553-21-6 | When ready for use, the end-use concentration is not to exceed 4400 ppm. |
| Magnesium sulfate tetrahydrate | 24378-31-2 | When ready for use, the end-use concentration is not to exceed 4400 ppm. |
| Magnesium sulfate trihydrate | 15320-30-6 | When ready for use, the end-use concentration is not to exceed 4400 ppm. |
| Maltyl isobutyrate | 65416-14-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| p-Mentha-1,8-dien-7-ol | 536-59-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Mentha-1,8-dien-7-yl acetate | 15111-96-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Mentha-8-thiol-3-one | 38462-22-5 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| p-Menthan-3-one | 10458-14-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| p-Menthane, 1,8-epoxy- | 470-82-6 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 1-p-Menthene-8-thiol | 71159-90-5 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Menthol | 15356-70-4; 89-78-1; 1490-04-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-Mercapto-4-methyl-2-pentanone | 19872-52-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methane sulfonic acid | 75-75-2 | When ready for use, the end use concentration is not to exceed 5,000 ppm. |
| 1H-3a,7-Methanoazulen-6-ol, octahydro-3,6,8,8-tetramethyl-,[3R-(3.α,3a.β,6.α,7.β,8aα)] | 77-53-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methoxy-3-(1-methylpropyl)pyrazine | 24168-70-5 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 1-Methoxy-4-propylbenzene | 104-45-0 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| 2-Methoxy-4-propylphenol | 2785-87-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-Methoxy-2-methyl-2-butanethiol | 94087-83-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methoxy-4-methylphenol | 93-51-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-(p-Methoxyphenyl)-2-butanone | 104-20-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methoxy-4-vinylphenol | 7786-61-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methylene blue | 61-73-4 | When ready for use, the end-use concentration is not to exceed 0.4 ppm. |
| Methyl-α-ionone | 127-42-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4′-Methylacetophenone | 122-00-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl n-amyl ketone | 110-43-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Methyl anthranilate | 134-20-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Methylbenzyl alcohol | 98-85-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl benzoate | 93-58-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Methyl-2-butenyl acetate | 1191-16-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Methylcinnamaldehyde | 101-39-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl cinnamate | 103-26-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Methyl-1-cyclopentadecanone | 541-91-3 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Methylcyclopentenolone | 80-71-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 3-Methylcrotonic acid | 541-47-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl 3,7-dimethyl-6-octenoate | 2270-60-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 6-Methyl-3,5-heptadien-2-one | 1604-28-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 6-Methyl-5-hepten-2-one | 110-93-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Methyl heptine carbonate | 111-12-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl hexanoate | 106-70-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl linolenate | 301-00-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl 2-methylbutyrate | 868-57-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methyl-3-(p-isopropylphenyl)propionaldehyde | 103-95-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl N-acetylanthranilate | 2719-08-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl anisate | 121-98-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl N-methylanthranilate | 85-91-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl 2-nonenoate | 111-79-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl 2-nonynoate | 111-80-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl 3-nonenoate | 13481-87-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Methyl-2-(n-pentanyl)-2-cyclopenten-1-one | 1128-08-1 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 3-Methyl-2-(2E)-2-penten-1-yl-2-cyclopenten-1-one | 6261-18-3 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 3-Methyl-2-(2-pentenyl)-2-cyclopenten-1-one, (Z)- | 488-10-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Methyl phenethyl ether | 3558-60-9 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-Methyl-4-phenyl-2-butanol | 103-05-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 5-Methyl-2-phenyl-2-hexenal | 21834-92-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 4-Methyl-2-(1-phenylethyl)-1,3-dioxolane | 67634-23-5 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| p-Methylanisole | 104-93-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methylbenzyl acetate (mixed o,m,p) | 360676-70-1; 2216-45-7; 17373-93-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Methylbenzyl propionate | 120-45-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Methyl-2-butenyl benzoate | 5205-11-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4-(3,4-Methylenedioxyphenyl)-2-butanone | 55418-52-5 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| 3-Methylindole | 83-34-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl-α-ionone | 127-42-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl-β-ionone | 127-43-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl o-methoxybenzoate | 606-45-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl 3-methylthiopropionate | 13532-18-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Methylnaphthalene | 90-12-0 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| 2-Methyloctanal | 7786-29-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl octanoate | 111-11-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methylpent-2-en-1-oic acid | 3142-72-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| β-Methylphenethyl alcohol | 1123-85-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl phenylacetate | 101-41-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methyl-4-phenyl-2-butyl acetate | 103-07-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl n-propyl ketone | 107-87-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methyl-4-propyl-1,3-oxathiane | 67715-80-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-Methylpyrazine | 109-08-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Methyl salicylate | 119-36-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl sulfide | 75-18-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Methyl tetradecanoate | 124-10-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 5-Methyl-2-thiophenecarboxyaldehyde | 13679-70-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-Methyl-trans-2-butenoic acid | 80-59-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Methyl-5-(2,2,3-trimethyl-3-cyclopenten-1-yl)pent-4-en-2-ol | 67801-20-1 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Methyl undec-10-enoate | 111-81-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methylundecanal | 110-41-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Methyl-1,3-propanediol | 2163-42-0 | None. |
| Musk ambrette | 123-69-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Myristaldehyde | 124-25-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Myristic acid | 544-63-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Naphtho{2,1-b}furan, dodecahydro-3a,6,6,9a-tetramethyl- | 3738-00-9 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| β-Naphthyl ethyl ether | 93-18-5 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| β-Naphthyl isobutyl ether | 2173-57-1 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| β-Naphthyl methyl ether | 93-04-9 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Nerol oxide | 1786-08-9 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Nerolidiol | 142-50-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Neroli bigarde oil (
L.) | 8016-38-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Nerolidol (isomer unspecified) | 7212-44-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Neryl acetate | 141-12-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Neryl formate | 2142-94-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Nitric acid | 7697-37-2 | When ready for use, the end-use concentration is not to exceed 1,000 ppm. |
| Nona-2-trans-6-cis-dienal | 557-48-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,6-Nonadien-1-ol | 7786-44-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,6-Nonadienal diethyl acetal | 67674-36-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1,3-Nonanediol acetate (mixed esters) | 1322-17-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Nonalactone | 104-61-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Nonanal | 124-19-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Nonanone | 821-55-6 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 6-Nonenal, (6Z)- | 2277-19-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Nonenal | 2463-53-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-6-Nonen-1-ol | 35854-86-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Nonyl acetate | 143-13-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Nonyl alcohol | 143-08-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles) | None | None. |
| Nootkatone | 4674-50-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Octadecanoic acid | 57-11-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Octadecanoic acid, calcium salt | 1592-23-0 | None. |
| 1-Octadecanol | 112-92-5 | None. |
| 9-Octadecenoic acid (9
)-, sulfonated, oxidized | 1315321-93-7 | When ready for use, the end-use concentration is not to exceed 250 ppm. |
| 9-Octadecenoic acid (9
)-, sulfonated, oxidized, potassium salts | 1315321-94-8 | When ready for use, the end-use concentration is not to exceed 250 ppm. |
| 9-Octadecenoic acid (9
)-, sulfonated, oxidized, sodium salts | 1315321-95-9 | When ready for use, the end-use concentration is not to exceed 250 ppm. |
| 2,6-Octadien-1-ol, 3,7-dimethyl-,(Z)- | 106-25-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Octalactone | 104-50-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| δ-Octalactone | 698-76-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Octanal | 124-13-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Octanal dimethyl acetal | 10022-28-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Octanesulfonic acid, sodium salt | 5324-84-5 | When ready for use, the end-use concentration is not to exceed 46 ppm. |
| 1-Octanol | 111-87-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Octanone | 111-13-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2,5,7-Octatrien-1-ol, 2,6-dimethyl0, 1-acetate | 197098-61-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Octen-3-ol | 3391-86-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 5-Octen-1-ol, (5Z)- | 64275-73-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Octen-3-yl acetate | 2442-10-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oil of anise | 8007-70-3 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Oil of Bergamot | 8007-75-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oil of camphor | 8008-51-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oil of citronella | 8000-29-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oil of lemon | 8008-56-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oil of lemongrass | 8007-02-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oil of orange | 8008-57-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, clove | 8000-34-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, Fir | 8021-29-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, geranium | 8000-46-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, ginger | 8007-08-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, grapefruit | 8016-20-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, lavender | 8000-28-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, lemon, terpene-free | 68648-39-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, lime | 8008-26-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, mimosa | 8031-03-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, orange, sweet, terpene-free | 68606-94-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, palmarosa | 8014-19-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, peppermint | 8006-90-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, rosemary | 8000-25-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Oils, sage | 8022-56-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Oils, spruce | 8008-80-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oils, star anise | 68952-43-2 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Oils, thyme | 8007-46-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oleic acid | 112-80-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oleic acid, ethyl ester | 111-62-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oleyl alcohol | 143-28-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Olibanum oil (Boswellia spp.) | 8016-36-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Orange flower water absolute | 8030-28-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Origanum oil, Spanish | 8007-11-2 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Orris absolute (
) | 8002-73-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ortho-benzyl-para-chlorophenol | 120-32-1 | When ready for use, the end-use concentration is not to exceed 2080 ppm. |
| 7-Oxabicyclo(2.2.1.)heptane, 1-methyl-4-(1-methylethyl)- | 470-67-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Oxacycloheptadec-10-ene-2-one | 28645-51-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 | 9003-11-6 | None. |
| Palmitic acid | 57-10-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Paraffin waxes and hydrocarbon waxes; carboxypolymethylene resin; and paraffin waxes and hydrocarbon, oxidized, lithium salts | 8002-74-2; 68153-22-0; 68649-48-9 | None. |
| Pelargonic (nonanoic) acid | 112-05-0 | None. |
| ω-Pentadecalactone | 106-02-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Pentanol | 71-41-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Pepper, black, oil (
L.) | 8006-82-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Peppermint (
) ext | 84082-70-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Peroxyacetic acid | 79-21-0 | When ready for use, the end-use concentration is not to exceed 58 ppm. |
| Peroxyoctanoic acid | 33734-57-5 | When ready for use, the end-use concentration is not to exceed 52 ppm. |
| Petitgrain bigarade oil | 8014-17-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Petitgrain Paraguay oil | 8014-17-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Phellandrene | 99-83-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl acetate | 103-45-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl butyrate | 103-52-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl cinnamate | 103-53-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl formate | 104-62-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl hexanoate | 6290-37-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl propionate | 122-70-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl salicylate | 87-22-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl tiglate | 55719-85-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenol, 2-methoxy-4-(2-propenyl)- | 97-53-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenol, 2,4,6-trimethyl- | 527-60-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenoxy ethyl isobutyrate | 103-60-6 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Phenethyl isobutyrate | 103-48-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenethyl phenylacetate | 102-20-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenylacetaldehyde dimethyl acetal | 101-48-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenylacetaldehyde glyceryl acetal | 29895-73-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenylacetic acid | 103-82-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenyl ethyl alcohol | 60-12-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phenylethyl isoamyl ether | 56011-02-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2-Phenylethyl 2-methylbutyrate | 24817-51-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Phenylpropionaldehyde | 104-53-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Phenylpropionic acid | 501-52-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Phenylpropyl acetate | 122-72-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3-Phenylpropyl cinnamate | 122-68-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-(3-Phenylpropyl)tetrahydrofuran | 3208-40-0 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| 3-Phenyl-1-propanol | 122-97-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Phenylpropionaldehyde | 93-53-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Phenylpropionaldehyde dimethyl acetal | 90-87-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Phosphonic acid, (1-hydroxyethylidene)bis- | 2809-21-4 | When ready for use, the end-use concentration is not to exceed 14 ppm. |
| Phosphoric acid | 7664-38-2 | None. |
| Phosphoric acid, trisodium salt | 7601-54-9 | When ready for use, the end-use concentration is not to exceed 5916 ppm. |
| Pine needle oil | 8000-26-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Pine scotch oil (
L.) | 8023-99-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Pinene | 80-56-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Piperonyl acetate | 326-61-4 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Polyammonium bisulfate | 10043-02-4 | When ready for use, the end-use concentration is not to exceed 250 ppm. |
| Potassium 2-benzyl-4-chlorophenate | 35471-49-9 | When ready for use, the end-use concentration is not to exceed 2080 ppm. |
| Potassium bromide | 7758-02-3 | When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen. |
| Potassium iodide | 7681-11-0 | When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine. |
| 1,3-Propanediol | 504-63-2 | None. |
| Propanoic acid, 2-methyl-, 4-formyl-2-methoxyphenyl ester | 20665-85-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Propanoic acid | 79-09-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-propen-1-aminium,
-dimethyl-
-propenyl-, chloride, homopolymer | 26062-79-3 | When ready for use, the end-use concentration is not to exceed 0.6%. |
| Propenylguaethol | 94-86-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Propionic acid | 79-09-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Propyl phenethyl acetal | 7493-57-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Propylene glycol | 57-55-6 | None. |
| α-Propylphenethyl alcohol | 705-73-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| o-Propylphenol | 644-35-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Propylphenol | 645-56-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4H-Pyran-4-one, 3-hydroxy-2-methyl- | 118-71-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 2,6-Pyridinedicarboxylic acid | 499-83-2 | When ready for use, the end-use concentration is not to exceed 2 ppm. |
| Pyruvic acid | 127-17-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Quaternary ammonium compounds, alkyl (C
-C
) benzyldimethyl, chlorides | 8001-54-5 | When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound. |
| Quaternary ammonium compounds: n-alkyl (C
) dimethyl benzyl ammonium chloride | 68424-85-1 | When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound. |
| Quaternary Ammonium Compounds: n-alkyl (C
) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 | 85409-23-0 | When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound. |
| Quaternary ammonium compounds n-alkyl (C
-C
) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 | None | When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound. |
| Quaternary ammonium compounds, Di-n-Alkyl (C
-
) dimethyl ammonium chloride, average molecular weight (in amu) 332 to 361 | None | When ready for use, the end-use concentration of these specific in quaternary ammonium compounds is not to exceed 240 ppm of active quaternary ammonium compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 400 ppm of active quaternary compound. |
| Quaternary ammonium compounds, didecyl dimethyl ammonium carbonate/didecyl dimethyl ammonium bicarbonate | 148788-55-0/148812-654-1 | When ready for use, the end-use concentration of these specific ammonium compounds is not to exceed 400 ppm of active quaternary ammonium compound. |
| Rose absolute (
spp.) | 8007-01-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Rue oil (Ruta graveolens L.) | 8014-29-7 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Salicylaldehyde | 90-02-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Sandalwood yellow oil (Santalum album L.) | 8006-87-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Santalol | 11031-45-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-α-Santalol | 115-71-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| cis-β-Santalol | 77-42-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Schinus molle oil (
L.) | 68917-52-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Sclareol | 515-03-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| | | |
| Silver ions resulting from the use of electrolytically-generated silver ions stabilized in citric acid as silver dihydrogen citrate (does not include metallic silver) | 14701-21-4 | When ready for use, the end-use concentration of silver ions is not to exceed 50 ppm of active silver. |
| Sodium 2-benzyl-4-chlorophenate | 3184-65-4 | When ready for use, the end-use concentration is not to exceed 2080 ppm. |
| Sodium bisulfate | 7681-38-1 | When ready for use, the end-use concentration is not to exceed 2,000 ppm. |
| Sodium dioctyl sulfosuccinate | 577-11-7 | None. |
| Sodium lauroyl sarcosinate | 137-16-6 | When ready for use, the end-use concentration is not to exceed 10,000 ppm. |
| Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)- | 9005-65-6 | None. |
| Spike lavender oil (Lavandula spp.) | 8016-78-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Stearic acid | 57-11-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Storax (
spp.) | 8046-19-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Sulfuric acid | 7664-93-9 | Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils in antimicrobial formulations. Not to exceed 600 ppm. |
| Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) | 151-21-3 | When ready for use, the end-use concentration is not to exceed 350 ppm. |
| Tagetes oil (
L.) | 8016-84-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tall oil fatty acid | 61790-12-3 | Solvent/carrier. |
| Tangerine oil (Citrus reticulata blanco) | 8008-31-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tartaric acid | 87-69-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| DL-Tartaric acid | 133-37-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Terpinene | 99-86-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Terpinene | 99-85-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| α-Terpineol | 98-55-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Terpinyl acetate (isomer mixture) | 8007-35-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Tetradecanol | 112-72-1 | None. |
| α-Terpinyl propionate | 80-27-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tetraacetylethylenediamine (TAED) | 10543-57-4 | None. |
| Tetradecanoic acid, ethyl ester | 124-06-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tetradecanoic acid, 1-methylethyl ester | 110-27-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tetrahydrogeranial | 5988-91-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tetrahydrolinalool | 78-69-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tetrahydro-4-methyl-2-(2-methylpropen-1-yl)pyran | 16409-43-1 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Tetrahydro-6-(3-pentenyl)-2H-pyran-2-one | 32764-98-0 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Theaspirane | 36431-72-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Thiogeraniol | 39067-80-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Thymol (8CA) | 89-83-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Thyme (
) Oil | 84929-51-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tolu, balsam, gum (
spp.) | 9000-64-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Tolylacetaldehyde | 104-09-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Tolyl acetate | 140-39-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Tolyl isobutyrate | 103-93-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Tolyl 3-methylbutyrate | 55066-56-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Tolyl octanoate | 59558-23-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| p-Tolyl phenylacetate | 101-94-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-(p-Tolyl)propionaldehyde | 99-72-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| trans-1,3,3,3-Tetrafluoroprop-1-ene | 29118-24-9 | None. |
| 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt | 2893-78-9 | When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine. |
| 2-Tridecanal | 7774-82-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2-Tridecanone | 593-08-8 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| Triethyl citrate | 77-93-0 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Triethylene glycol | 112-27-6 | None. |
| p-α,α-Trimethylbenzyl alcohol | 1197-01-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,6,6-Trimethyl-1-cyclohexen-1-acetaldehyde | 472-66-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,6,6-Trimethyl-1&2-cyclohexen-1-carboxaldehyde | 432-25-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1,3,3-Trimethyl-2-norbornanyl acetate | 13851-11-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3,3,5-Trimethylcyclohexanol | 116-02-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| (Z)-β-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one; (2E)-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one | 35044-68-9; 23726-92-3; 23726-91-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,3,6-Trimethylphenol | 2416-94-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 4,7,7-Trimethyl-6-thiabicyclo[3.2.1]octane | 68398-18-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| δ-1-(2,6,6-Trimethyl-3-cyclohexen-1-yl)-2-buten-1-one | 57378-68-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3,5,5-Trimethylhexanal | 5435-64-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Tuberose oil (Polianthes tuberosa L.) | 8024-05-3 | When ready for use, the end-use concentration is not to exceed 5 ppm. |
| Turpentine, oil | 8006-64-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Undecalactone | 104-67-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Undecanal | 112-44-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 1-Undecanol | 112-42-5 | Carrier/Adjuvant and Coating Agent/Binder. |
| 2-Undecanone | 112-12-9 | When ready for use, the end-use concentration is not to exceed 33 ppm. |
| 1,3,5-Undecatriene | 16356-11-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 9-Undecenal | 143-14-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 10-Undecenal | 112-45-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 10-Undecenoic acid | 112-38-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 10-Undecenoic acid, ethyl ester | 692-86-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 10-Undecen-1-yl acetate | 112-19-6 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Undecyl alcohol | 112-42-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Valencene | 4630-07-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Valeraldehyde | 110-62-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Valeric acid | 109-52-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| γ-Valerolactone | 108-29-2 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Vanilla (
spp.) | 8024-06-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Vanilla extract (
spp.) | 84650-63-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| ext | 94167-14-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Vanillin | 121-33-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Veratraldehyde | 120-14-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Violet leaves absolute (Viola odorata L.) | 90147-36-7 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Waxes and waxy substances, rice bran, oxidized | 1883583-80-9 | None. |
| Wintergreen oil | 68917-75-9 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Xylenesulfonic acid, sodium salt | 1300-72-7 | When ready for use, the end-use concentration is not to exceed 500 ppm. |
| 2,5-Xylenol | 95-87-4 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 2,6-Xylenol | 576-26-1 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| 3,4-Xylenol | 95-65-8 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Ylang-ylang oils | 8006-81-3 | When ready for use, the end-use concentration is not to exceed 100 ppm. |
| Zingerone | 122-48-5 | When ready for use, the end-use concentration is not to exceed 100 ppm. |