14 CFR § 27.605 - Fabrication methods.

---
identifier: "/us/cfr/t14/s27.605"
source: "ecfr"
legal_status: "authoritative_unofficial"
title: "14 CFR § 27.605 - Fabrication methods."
title_number: 14
title_name: "Aeronautics and Space"
section_number: "27.605"
section_name: "Fabrication methods."
chapter_name: "FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION"
subchapter_number: "C"
subchapter_name: "AIRCRAFT"
part_number: "27"
part_name: "AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT"
positive_law: false
currency: "2026-04-05"
last_updated: "2026-04-05"
format_version: "1.1.0"
generator: "[email protected]"
authority: "49 U.S.C. 106(f), 106(g), 40113, 44701-44702, 44704."
regulatory_source: "Docket No. 5074, 29 FR 15695, Nov. 24, 1964, unless otherwise noted."
cfr_part: "27"
---


# 27.605 Fabrication methods.

(a) The methods of fabrication used must produce consistently sound structures. If a fabrication process (such as gluing, spot welding, or heat-treating) requires close control to reach this objective, the process must be performed according to an approved process specification.

(b) Each new aircraft fabrication method must be substantiated by a test program.

(Secs. 313(a), 601, 603, 604, and 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424 and 1425); sec. 6(c) of the Dept. of Transportation Act (49 U.S.C. 1655(c)))

[Doc. No. 5074, 29 FR 15695, Nov. 24, 1964, as amended by Amdt. 27-16, 43 FR 50599, Oct. 30, 1978]