Title 46, Part 162 — Engineering Equipment

Section 162.017-0

Preemptive effect.

Section 162.017-1

Incorporation by reference.

Section 162.017-2

Type.

Section 162.017-3

Materials, construction, and workmanship.

Section 162.017-4

Inspections and testing.

Section 162.017-5

Marking.

Section 162.017-6

Procedure for approval.

Section 162.018-1

Applicable specifications, and referenced material.

Section 162.018-2

Scope.

Section 162.018-3

Materials.

Section 162.018-4

Construction and workmanship.

Section 162.018-5

Blow-down adjustment and popping tolerance.

Section 162.018-6

Marking.

Section 162.018-7

Flow rating tests.

Section 162.018-8

Procedure for approval.

Section 162.027-1

Scope.

Section 162.027-2

Incorporation by reference.

Section 162.027-3

Design, construction, testing, and marking requirements.

Section 162.027-4

Approval procedures.

Section 162.028-1

Incorporation by reference.

Section 162.028-2

Classification.

Section 162.028-3

Requirements.

Section 162.028-4

Marine type label.

Section 162.028-5

Recognized laboratories.

Section 162.028-6

Examinations, tests, and inspections.

Section 162.028-7

Procedure for listing and labeling.

Section 162.028-8

Termination of listing or labeling.

Section 162.039-1

Incorporation by reference.

Section 162.039-2

Classification.

Section 162.039-3

Requirements.

Section 162.039-4

Marine type label.

Section 162.039-5

Recognized laboratories.

Section 162.039-6

Examinations, tests, and inspections.

Section 162.039-7

Procedure for listing and labeling.

Section 162.039-8

Termination of listing or labeling.

Section 162.050-1

Scope.

Section 162.050-3

Definitions.

Section 162.050-4

Incorporation by reference: Where can I get a copy of the publications mentioned in this part?

Section 162.050-5

Contents of application.

Section 162.050-7

Approval procedures.

Section 162.050-9

Test report.

Section 162.050-11

Marking.

Section 162.050-13

Factory production and inspection.

Section 162.050-15

Designation of facilities.

Section 162.050-17

Separator test rig.

Section 162.050-19

Oil content meter and bilge alarm test rig.

Section 162.050-20

Separator and bilge alarm test fluids.

Section 162.050-21

Separator: Design specification.

Section 162.050-23

Separator: Approval tests.

Section 162.050-25

Cargo monitor: Design specification.

Section 162.050-27

Oil content meter: Approval tests.

Section 162.050-33

Bilge alarm: Design specification.

Section 162.050-35

Bilge alarm: Approval tests.

Section 162.050-37

Vibration test.

Section 162.050-39

Measurement of oil content.

Section 162.060-1

Purpose and scope.

Section 162.060-3

Definitions.

Section 162.060-5

Incorporation by reference.

Section 162.060-10

Approval procedures.

Section 162.060-12

Use and acceptance of existing test data.

Section 162.060-14

Information requirements for the ballast water management system (BWMS) application.

Section 162.060-16

Changes to an approved ballast water management system (BWMS).

Section 162.060-18

Suspension, withdrawal, or termination of approval.

Section 162.060-20

Design and construction requirements.

Section 162.060-22

Marking requirements.

Section 162.060-24

Test Plan requirements.

Section 162.060-26

Land-based testing requirements.

Section 162.060-28

Shipboard testing requirements.

Section 162.060-30

Testing requirements for ballast water management system (BWMS) components.

Section 162.060-32

Testing and evaluation requirements for active substances, preparations, and relevant chemicals.

Section 162.060-34

Test Report requirements.

Section 162.060-36

Quality Assurance Project Plan (QAPP) requirements.

Section 162.060-38

Operation, Maintenance, and Safety Manual (OMSM).

Section 162.060-40

Requirements for Independent Laboratories (ILs).

Section 162.060-42

Responsibilities for Independent Laboratories (ILs).

Section 162.161-1

Scope.

Section 162.161-2

Incorporation by reference.

Section 162.161-3

Materials.

Section 162.161-4

Construction.

Section 162.161-5

Instruction manual for design, installation, operation, and maintenance.

Section 162.161-6

Tests for approval.

Section 162.161-7

Inspections at production.

Section 162.161-8

Marking.

Section 162.161-9

Procedure for approval.

Section 162.163-1

Scope.

Section 162.163-2

Incorporation by reference.

Section 162.163-3

Performance, design, construction, testing, and marking requirements.

Section 162.163-4

Approval procedures.